DCS DCS36-BQARS (pre 2006)

30639-1-R Smoker burner.
Stainless steel replacement smoker burner.

Fits DCS 36A and 48A Professional Series grills. Replaces original DCS part# 30639.

.

Part Number: DCS-30639-R1
Dimensions: 18” x 1”
Material: stainless steel
Weight: 1.0

12012-02-R CI H Burner.
Cast iron replacement ”H” burner. Fits older DCS 36” and 48” grills by Dynamic Cooking Systems.

Replaces original DCS burner part# 12012-02.

Includes Air Shutter part# DCS-12003-02-R.

Part Number: DCS-12012-02-R1
Dimensions: 20 1/2” x 6 1/4”
Material: cast iron
Weight: 13.6

12003-02-R Air shutter. Fits cast iron ”H” burners used on older DCS 27”, 36” and 48” Professional Series grills.

Replaces original DCS part# 12003-02.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.<.p> Made in USA .

Part Number: DCS-12003-02-R
Material: stainless steel
Weight: 0.05

19006-R Grill Rack.
Heavy duty porcelain steel grill rack. Fits DCS36, DCS36A, DCS48, and DCS48A Professional Series gas grills. Sometimes referred to as GRILL RACK - 36/48 BBQ-BLK.

• Replaces DCS factory part# 19006.
• Large diameter 5/16” porcelain steel rods.
• Sold individually.

Part Number: DCS-19006-R
Dimension Front-to-Back: 20 1/2”
Dimension Side-to-Side: 10 7/16”
Material: porcelain steel
Weight: 10.11

30522-R Lava Rock Support.
Stainless steel Lava Rock support tray. Fits DCS DCS36, DCS36A, DCS48, DCS48A Professional Series grills by Dynamic Cooking systems. These grills have the larger 20.5” cast iron H burners.

Replaces original DCS part# 30522.

• Sometimes shipped with vinyl peel-off coating. Remove before use.
• Made in USA
• Sold individually, number required varies

Part Number: DCS-30522-R
Dimensions: 19” x 9 9/16”
Material: stainless steel
Weight: 2.2

10312-R LAVA ROCK.
Natural lava rock processed and screened for uniformity. Use with Support Rack 30709-020.

NOTE: This is NOT a DCS product. The original DCS part was 4 pounds of Lava Rock. This is a 7lb bag manufactured by GrillPro.

Part Number: DCS-10312-R
Material: pumice
Weight: 7.5

16190-R KIT, ROTARY IGNITER & KNOB BBQ. Single outlet rotary igniter for DCS Professional Series grills by Dynamic Cooking Systems.

• Replaces factory part# 16190
• Includes Igniter, knob, and mounting screws

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DCS-16190-R
Weight: 0.2

Igniter electrode kit for use on DCS models with cast iron burners.

• Collector box
• Electrode with ceramic insulator
• 15” wire with round connector

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces DCS factory part# DCS-13012-6

Part Number: 06020
Material: ceramic
Weight: 0.2

24” LP hose and regulator with QCC-1 connection.

• For use on ”new style” QCC-1 tanks.
• Consists of hose part# 01000 and regulator part# 00920.
• Hose end with SAE 3/8” female flare fitting connects to grill.

Note: The grill must have a matching SAE 3/8” male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 3/8” fitting is much larger, approximately 5/8”. See our flare fitting description for information on measuring and sizes.

Replaces DCS factory part# DCS-13026-01

Part Number: 80012
Dimensions: 23 1/2” x 0 1/2”
Weight: 0.80

Brass valve for DCS.

• For LP and natural gas grills (see below)
• Off position D-Value: 12 o'clock
• Stem diameter: 8mm
• Orifice not included

NOTE: There is a set screw in the stem that allows this valve to be used in both LP or natural gas grills. The valve is shipped with the screw set in LP position. Turn the screw counterclockwise about seven turns for natural gas use.

Replaces DCS factory part# DCS-13017

Part Number: 30171
Dimensions: 3 7/16” x 1 5/16”
Material: brass
Weight: 0.3

#59 brass orifice for rotisserie burner. Fits liquid propane (LP) gas grills. Includes brass elbow with 1/4” compression fitting.

Replaces DCS factory part# DCS-18020-02

Part Number: CLA-VL0251
Material: brass
Weight: 0.15

32038-R Smoker burner tray.
Stainless steel wood chip tray for smoking.

Fits DCS 36A and48A Professional Series grills by Dymaniv Cooking Systems. Replaces original DCS part# 32038.

.

Part Number: DCS-32038-R
Material: stainless steel
Weight: 0.40

Natural lava rock processed and screened for uniformity. 7 lb. bag is enough for all full sized grills. Click the photo to find easy steps for installing lava rocks.

Part Number: 45887
Material: pummise
Weight: 7.0

HOW TO GRILL The Complete Illustrated Book of Barbecue Techniques. Steve Raichlen presents a full-color, step-by-step technique book that gets to the core of the grilling experience by showing and telling exactly how it's done. With more than 1,000 photographs, if features over 100 techniques and recipes, from how to set up a three-zone fire to how to grill a perfect prime rib, to grilling pizza, shellfish, vegetables, tofu, fruit, and s'mores.

Part Number: 0-7611-2014-9
Dimensions: 8” x 9 1/4”
Material: Paperback
Weight: 3.0

50-piece ceramic briquette set. Works in all grills designed for briquettes or lava rock. Fits briquette tray parts 94751, 92571 and other simular trays.

Part Number: 41650
Dimensions: 2” x 2”
Material: ceramic
Weight: 7.2

16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.

Part Number: 40240
Material: chrome steel
Weight: 0.9

Marinade Injector.

For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.

Part Number: 14950
Material: stailess steel
Weight: 0.5

Aluminum foil grilling trays. Package of three.

• Heavy duty aluminum foil
• Re-usable
• Great for grilling delicate foods like fish and veggies

Part Number: 50426
Dimensions: 9” x 13”
Weight: 0.4

EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.

Part Number: 00030
Weight: 0.1