DCS DCS36-BQARS

304 Stainless steel 15,000 BTU infrared rotissierie burner. For use with both liquid propane (LP) and natural gas grills. Orifice not included. Use old orifice or purchase our orifice part# CLA-VL0251 for LP, or part# CLA-VB0246 for natural gas applications.

Dimensions:

• Maximum overall length, including mounting tab on one end: 20 7/8”
• Maximum width: 3 3/8”

Replaces DCS factory part# DCS-210357

Part Number: CLA-BS0250
Dimensions: 3 3/8” x 20”
Material: stainless steel and ceramic
Weight: 3.50

213466 SMOKER BRNR ASSY.

Stainless steel replacement smoker burner. Fits DCS DCS36, DCS36A, DCS48, DCS48A Professional Series grills. Replaces original DCS part# 213466.

.

Part Number: DCS-213466-R1
Dimensions: 18” x 1”
Material: stainless steel
Weight: 0.7

210348-R BURNER H 36/48 MAT PORC.
Cast iron replacement ”H” burner. Fits older DCS 36” and 48” grills.

Replaces original DCS burner part# 210348.

NOTE: Also fits grills manufactured by Dynamic Cooking Systems (DCS) for other brands.

Includes Air Shutter part# DCS-210330-R.

Part Number: DCS-210348-R1
Dimensions: 20 1/2” x 6 1/4”
Material: cast iron
Weight: 13.6

210330-R Air shutter. Fits cast iron ”H” burners used on older DCS 27”, 36” and 48” Professional Series grills.

Replaces original DCS part# 210330.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Made in USA .

Part Number: DCS-210330-R
Material: stainless steel
Weight: 0.05

212408-R GRILL RACK - 36/48 BBQ-BLK.

Heavy duty porcelain steel grill rack. Fits DCS36, DCS36A, DCS48, and DCS48A Professional Series gas grills.

• Replaces DCS factory part# 212408.
• Large diameter 5/16” porcelain steel rods.
• Sold individually.

Part Number: DCS-212408-R
Dimension Front-to-Back: 20 1/2”
Dimension Side-to-Side: 10 7/16”
Material: porcelain steel
Weight: 10.11

213949-R RADIANT W/A 36/48 BQ.
Stainless steel Lava Rock support. Fits DCS DCS36, DCS36A, DCS48, DCS48A Professional Series grills. These grills have the larger 20.5” cast iron H burners.

Replaces original DCS part# 213949.

• Sometimes shipped with vinyl peel-off coating. Remove before use.
• Made in USA
• Sold individually, number required varies

Part Number: DCS-213949-R
Dimensions: 19” x 9 9/16”
Material: stainless steel
Weight: 2.2

210005-R LAVA ROCK.
Natural lava rock processed and screened for uniformity. For use with Support Rack/Radient 213524 and 213949.

NOTE: This is NOT a DCS product. The original DCS part was 4 pounds of Lava Rock. This is a 7lb bag manufactured by GrillPro.

Part Number: DCS-210005-R
Material: pumice
Weight: 7.5

Push-Button self-grounding piezo spark generator. Has round male connector, so connecting wire needs to be female round connector. If needed, see part# 03199C for a short adapter wire that converts flat female spade connectors to female round. For more information, see our help center article Ignition 101.

Replaces DCS factory part# DCS-211551

Part Number: 03100
Weight: 0.1

Igniter electrode kit for use on DCS models with cast iron burners.

• Collector box
• Electrode with ceramic insulator
• 15” wire with round connector

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces DCS factory part# DCS-210730

Part Number: 06020
Material: ceramic
Weight: 0.2

Universal 2 3/4” adaptor wire with a round female end and a male spade end that has a protective cover.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03199C
Weight: 0.05

Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

• Wire has female spade connector on one end and square plastic connector on the other
• Square plastice connector attaches to spark generator
• Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 03610
Weight: 0.05

14” ground wire with female spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03620
Weight: 0.1

24” LP hose and regulator with QCC-1 connection.

• For use on ”new style” QCC-1 tanks.
• Consists of hose part# 01000 and regulator part# 00920.
• Hose end with SAE 3/8” female flare fitting connects to grill.

Note: The grill must have a matching SAE 3/8” male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 3/8” fitting is much larger, approximately 5/8”. See our flare fitting description for information on measuring and sizes.

Replaces DCS factory part# DCS-210819

Part Number: 80012
Dimensions: 23 1/2” x 0 1/2”
Weight: 0.80

Brass valve for DCS.

• For LP and natural gas grills (see below)
• Off position D-Value: 12 o'clock
• Stem diameter: 8mm
• Orifice not included

NOTE: There is a set screw in the stem that allows this valve to be used in both LP or natural gas grills. The valve is shipped with the screw set in LP position. Turn the screw counterclockwise about seven turns for natural gas use.

Replaces DCS factory part# DCS-210733

Part Number: 30171
Dimensions: 3 7/16” x 1 5/16”
Material: brass
Weight: 0.3

#59 brass orifice for rotisserie burner. Fits liquid propane (LP) gas grills. Includes brass elbow with 1/4” compression fitting.

Part Number: CLA-VL0251
Material: brass
Weight: 0.15

6 chrome plated 18” shish-ke-bab skewers

Part Number: 63371
Weight: 0.2

Ceramic briquettes 48 pieces. Fits briquette trays 94751, 92571 and and simular trays. Works in all grills designed for briquettes or lava rock. Each briquette measures 2” x 2” x 3/4".

Part Number: 41648
Dimensions: 2” x 2”
Material: ceramic
Weight: 7.5

Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.

Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5

economy basting brushes. Two brushes, 7.5” long.

Part Number: 43054
Weight: 0.1

Stainless steel chicken roaster. Commonly called Beer Can roasters.

• The best way to roast poultry on the grill
• For use in barbecues and ovens
• Dishwasher safe
• Includes rack, rack support, and basting brush

Part Number: 41333
Material: stainless steel
Weight: 0.10

Grill Mitt With Neoprene Palm.

16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most

Part Number: 90963
Weight: 0.5