DCS BGB30-BQRN (pre 2006)

12285-R Tube burner.
Premium quality stainless steel replacement burner. Fits older BGB30 series grills by Dynamic Cooking Systems.

Replaces original DCS part# 12285.

Part Number: DCS-12285-R
Dimensions: 19 1/4” x 6”
Material: stainless steel
Weight: 3.9

304 Stainless steel 15,000 BTU infrared rotissierie burner. For use with both liquid propane (LP) and natural gas grills. Orifice not included. Use old orifice or purchase our orifice part# CLA-VL0251 for LP, or part# CLA-VB0246 for natural gas applications.

Dimensions:

• Maximum overall length, including mounting tab on one end: 20 7/8”
• Maximum width: 3 3/8”

Replaces DCS factory part# DCS-12021-02

Part Number: CLA-BS0250
Dimensions: 3 3/8” x 20”
Material: stainless steel and ceramic
Weight: 3.50

19503-01-RGrate BGB30.

Premium quality, heavy duty stainless steel grill rack. Fits BGB30 and BGC30 Professional Series gas grills by Dynamic Cooking Systems (DCS). Sometimes referred to as Grate BGB30. Part 19503-01 has no grid lifter hole.

• Replaces DCS factory part# 19503-01.
• Made of commercial grade polished 304 stainless steel.
• Large diameter 5/16” solid stainless rods.
• Meets or exceeds all specifications of the original factory part.
• Made in USA .
• Sold individually.

Part Number: DCS-19503-01-R
Dimension Front-to-Back: 21 1/2”
Dimension Side-to-Side: 12 7/8”
Material: stainless steel
Weight: 10.9

19503-02-R Grate BGB30.

Premium quality, heavy duty stainless steel grill rack. Fits BGB30 and BGC30 Professional Series gas grills by Dynamic Cooking Systems (DCS). Sometimes referred to as Grate BGB30. Part 19503-02 has a grid lifter hole.

• Replaces DCS factory part# 19503-02.
• Made of commercial grade polished 304 stainless steel.
• Large diameter 5/16” solid stainless rods.
• Meets or exceeds all specifications of the original factory part.
• Made in USA .
• Sold individually.

Part Number: DCS-19503-02-R
Dimension Front-to-Back: 21 1/2”
Dimension Side-to-Side: 12 7/8”
Material: stainless steel
Weight: 10.6

33248-R Radiant Assembly BGB30.
Stainless steel Housing Radiant housing/Tray assembly. Fits BGB30 Professional Series grills grills by Dynamic Cooking Systems.

Includes:
• 33246 Radiant Cap
• 33245 Radiant

• Replaces factory part# 33248
• Premium grade 304 stainless steel
• Holds 18 ceramic rods (not included)
• Sold individually

Part Number: DCS-33248-R
Dimensions: 18 5/8” x 9 7/8”
Material: stainless steel
Weight: 3.3

32224-R Ceramic Radiant Rods. Sometimes called CERAMIC ROD 9.50 (PKD).
Ceramic rods for radiant tray. 18 count. Fits many DCS Professional Series grills by Dynamic Cooking Systems.

• Replaces factory part# 32224
• Round ceramic rods are 9.5” long and 9/16” in diameter
• Sold as a package of 18 rods

Also available in a package of three. See part# CLA-MC0357.

Part Number: DCS-32224-R
Dimensions: 9 1/2” x 9/16”
Material: ceramic
Weight: 2.3

Ceramic radiant rods, package of three for DCS model BGB30-BQRN (pre 2006).

Part Number: CLA-MC0357
Dimensions: 9 1/2” x 9/16”
Material: ceramic
Weight: 0.6

Igniter electrode kit. Sold individually. Fits both left and right hand side.

Includes:
• Collector box (replaces OEM part 32801 and 32210-01)
• Electrode with ceramic insulator and 30” wire (replaces OEM parts 16281, 16281-02, and 16281-03)
• Small sex change wire with female spade connector and male round connector. Required for some grills that use a female spade connection to the ignitor.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04850
Material: ceramic
Weight: 0.2

18350-R IGNITION MODULE 4 OUTPUTS (BQR MOD).
9 volt spark generator with remote push button. Fits BG27, BGA27 and BGB30 series Professional grills that require a 4 outlet igniter.

• Replaces factory part 18350
• Includes 18353 Ignition button
• Requires 9V battery (not included)
• Sold individually

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DCS-18350-R
Weight: 0.40

Brass valve for DCS.

• For LP and natural gas grills (see below)
• Off position D-Value: 12 o'clock
• Stem diameter: 8mm
• Orifice not included

NOTE: There is a set screw in the stem that allows this valve to be used in both LP or natural gas grills. The valve is shipped with the screw set in LP position. Turn the screw counterclockwise about seven turns for natural gas use.

Replaces DCS factory part# DCS-13017

Part Number: 30171
Dimensions: 3 7/16” x 1 5/16”
Material: brass
Weight: 0.3

#59 brass orifice for rotisserie burner. Fits liquid propane (LP) gas grills. Includes brass elbow with 1/4” compression fitting.

Part Number: CLA-VL0251
Material: brass
Weight: 0.15

Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10” x 13 3/4”.

Part Number: 41338
Weight: 1.1

Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.

Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5

Marinade Injector.

For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.

Part Number: 14950
Material: stailess steel
Weight: 0.5

Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.

Part Number: 24785
Dimensions: 7 1/2” x 16”
Weight: 1.5

EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.

Part Number: 00030
Weight: 0.1