DCS BGA27-BQRN

304 Stainless steel 15,000 BTU infrared rotissierie burner. For use with both liquid propane (LP) and natural gas grills. Orifice not included. Use old orifice or purchase our orifice part# CLA-VL0251 for LP, or part# CLA-VB0246 for natural gas applications.

Dimensions:

• Maximum overall length, including mounting tab on one end: 20 7/8”
• Maximum width: 3 3/8”

Replaces DCS factory part# DCS-210357

Part Number: CLA-BS0250
Dimensions: 3 3/8” x 20”
Material: stainless steel and ceramic
Weight: 3.50

213995-R BURNER W/A.
Premium quality stainless steel replacement tube burner.

Fits BG27, BG36, BG48, BGA27, DCS27D, DCS27F, DCS36D, DCS36E, DCS48D, DCS48E Professional Series grills. Relaces original DCS part# 213995.

Replaces DCS factory part# DCS-213995

Part Number: DCS-213995-R
Dimensions: 19 1/4” x 6”
Material: stainless steel
Weight: 3.9

212918-R GRILL RACK BGA27.

Premium quality heavy duty stainless steel grill rack with one grid lifter notch. Our USA-made premium stainless cooking grids are simply the best obtainable.

Fits BGA27 Professional Series gas grills.

• Replaces DCS factory part# 212918.
• Large diameter 5/16” stainless steel rods.
• Commercial grade 304 stainless steel.
• Dimensions: 19 1/2” x 12 3/4”
• Made in USA
• Sold individally.

Part Number: DCS-212918-R
Dimension Front-to-Back: 19 1/2”
Dimension Side-to-Side: 12 3/4”
Material: stainless steel
Weight: 7.3

213997-R RADIANT BGA or HOUSING RADIANT BGB36-48.
Stainless steel Radiant. Fits many Professional Series grills by Fisher & Paykel.

• Replaces factory part# DCS-213997
• Includes 214046 End Cap Radiant & Hardware
• Premium grade 304 stainless steel
• Holds 18 ceramic rods
• Sold individually, number required varies by grill

Part Number: DCS-213997-R
Dimensions: 18 5/8” x 9 7/8”
Material: stainless steel
Weight: 3.3

214006P-R Ceramic Radiant Rods. Sometimes called CERAMIC ROD 9.50 (PKD). 18 count. Fits many DCS Professional Series grills.

• Replaces factory part# 214006P
• Round ceramic rods are 9.5” long and 9/16” in diameter
• Sold as a package of 18 rods

Also available in a package of three. See part# CLA-MC0357.

Part Number: DCS-214006P-R
Dimensions: 9 1/2” x 9/16”
Material: ceramic
Weight: 2.10

Ceramic radiant rods, package of three for DCS model BGA27-BQRN.

Part Number: CLA-MC0357
Dimensions: 9 1/2” x 9/16”
Material: ceramic
Weight: 0.6

Igniter electrode kit. Sold individually. Fits both left and right hand side.

Includes:
• Collector box (replaces OEM part 32801 and 32210-01)
• Electrode with ceramic insulator and 30” wire (replaces OEM parts 16281, 16281-02, and 16281-03)
• Small sex change wire with female spade connector and male round connector. Required for some grills that use a female spade connection to the ignitor.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04850
Material: ceramic
Weight: 0.2

212333-R BATTERY IGN MODULE 9V ELTEC 4.
9 volt spark generator with remote push button. Fits BG27, BGA27 and BGB30 series Professional grills that require a 4 outlet igniter.

• Replaces factory part 212333
• Includes 212336 Igniter switch (button)
• Requires 9V battery (not included)
• Sold individually

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DCS-212333-R
Weight: 0.40

Brass valve for DCS.

• For LP and natural gas grills (see below)
• Off position D-Value: 12 o'clock
• Stem diameter: 8mm
• Orifice not included

NOTE: There is a set screw in the stem that allows this valve to be used in both LP or natural gas grills. The valve is shipped with the screw set in LP position. Turn the screw counterclockwise about seven turns for natural gas use.

Replaces DCS factory part# DCS-210733

Part Number: 30171
Dimensions: 3 7/16” x 1 5/16”
Material: brass
Weight: 0.3

#59 brass orifice for rotisserie burner. Fits liquid propane (LP) gas grills. Includes brass elbow with 1/4” compression fitting.

Part Number: CLA-VL0251
Material: brass
Weight: 0.15

Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10” x 13 3/4”.

Part Number: 41338
Weight: 1.1

20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.

Part Number: 40269
Material: stainless steel
Weight: 0.14

Marinade Injector.

For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.

Part Number: 14950
Material: stailess steel
Weight: 0.5

Upright porcelain steel roasting rack with grid topper.

Part Number: 40935
Weight: 2.9

Deluxe venturi brush with 11” coil spring flexible shaft

Part Number: 77310
Weight: 0.3