DCS BGA27-BQRL (pre 2006)

304 Stainless steel 15,000 BTU infrared rotissierie burner. For use with both liquid propane (LP) and natural gas grills. Orifice not included. Use old orifice or purchase our orifice part# CLA-VL0251 for LP, or part# CLA-VB0246 for natural gas applications.

Dimensions:

• Maximum overall length, including mounting tab on one end: 20 7/8”
• Maximum width: 3 3/8”

Replaces DCS factory part# DCS-12021-2

Part Number: CLA-BS0250
Dimensions: 3 3/8” x 20”
Material: stainless steel and ceramic
Weight: 3.50

32217-R SS GRILL BURNER.
Premium quality stainless steel replacement tube burner.

Fits older BG27, BG36, BG48, BGA27, DCS27DS, DCS27FS, DCS36DS, DCS36E, and DCS48DS Professional Series grills by Dynamic Cooking Systems. Relaces original DCS part# 32217.

Replaces DCS factory part# DCS-32217

Part Number: DCS-32217-R
Dimensions: 19 1/4” x 6”
Material: stainless steel
Weight: 3.9

19014-03-R GRILL RACK S/S 27.
Premium quality heavy duty stainless steel grill rack with grid lifter notch. Our USA-made premium stainless cooking grids are simply the best obtainable.

Fits BGA27 Professional Series gas grills by Dynamic Cooking Systems.

• Replaces DCS factory part# 19014-03.
• Large diameter 5/16” stainless steel rods.
• Commercial grade polished 304 stainless steel.
• Dimensions: 19 1/2” x 12 3/4”
• Made in USA
• Sold individally.

Note: In later models, DCS changed the number of this part to 19495-02.

Part Number: DCS-19014-03-R
Dimension Front-to-Back: 19 1/2”
Dimension Side-to-Side: 12 3/4”
Material: stainless steel
Weight: 7.3

32291-02-R Radiant Assembly BGA/BGB or RADIANT>
Stainless steel Housing Radiant housing/Tray assembly. Fits BGA27, BGA36, BGA48, BGB36, and BGB48 Professional Series grills grills by Fisher & Paykel.

Includes:
• 32264-01 Radiant Cap
• 32218-02 Radiant

• Replaces factory part# 32291-02
• Premium grade 304 stainless steel
• Holds 18 ceramic rods (not included)
• Sold individually

NOTE: Part# 32291-02 is shown on some BGA27 models as the Radiant only, not an assembly, but is the same.

Part Number: DCS-32291-02-R
Dimensions: 18 5/8” x 9 7/8”
Material: stainless steel
Weight: 3.3

32224-R Ceramic Radiant Rods. Sometimes called CERAMIC ROD 9.50 (PKD).
Ceramic rods for radiant tray. 18 count. Fits many DCS Professional Series grills by Dynamic Cooking Systems.

• Replaces factory part# 32224
• Round ceramic rods are 9.5” long and 9/16” in diameter
• Sold as a package of 18 rods

Also available in a package of three. See part# CLA-MC0357.

Part Number: DCS-32224-R
Dimensions: 9 1/2” x 9/16”
Material: ceramic
Weight: 2.3

Ceramic radiant rods, package of three for DCS model BGA27-BQRL (pre 2006).

Part Number: CLA-MC0357
Dimensions: 9 1/2” x 9/16”
Material: ceramic
Weight: 0.6

Igniter electrode kit. Sold individually. Fits both left and right hand side.

Includes:
• Collector box (replaces OEM part 32801 and 32210-01)
• Electrode with ceramic insulator and 30” wire (replaces OEM parts 16281, 16281-02, and 16281-03)
• Small sex change wire with female spade connector and male round connector. Required for some grills that use a female spade connection to the ignitor.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04850
Material: ceramic
Weight: 0.2

18350-R IGNITION MODULE 4 OUTPUTS (BQR MOD).
9 volt spark generator with remote push button. Fits BG27, BGA27 and BGB30 series Professional grills that require a 4 outlet igniter.

• Replaces factory part 18350
• Includes 18353 Ignition button
• Requires 9V battery (not included)
• Sold individually

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DCS-18350-R
Weight: 0.40

24” LP hose and regulator with QCC-1 connection.

• For use on ”new style” QCC-1 tanks.
• Consists of hose part# 01000 and regulator part# 00920.
• Hose end with SAE 3/8” female flare fitting connects to grill.

Note: The grill must have a matching SAE 3/8” male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 3/8” fitting is much larger, approximately 5/8”. See our flare fitting description for information on measuring and sizes.

Replaces DCS factory part# DCS-13230

Part Number: 80012
Dimensions: 23 1/2” x 0 1/2”
Weight: 0.80

Brass valve for DCS.

• For LP and natural gas grills (see below)
• Off position D-Value: 12 o'clock
• Stem diameter: 8mm
• Orifice not included

NOTE: There is a set screw in the stem that allows this valve to be used in both LP or natural gas grills. The valve is shipped with the screw set in LP position. Turn the screw counterclockwise about seven turns for natural gas use.

Replaces DCS factory part# DCS-13017

Part Number: 30171
Dimensions: 3 7/16” x 1 5/16”
Material: brass
Weight: 0.3

#59 brass orifice for rotisserie burner. Fits liquid propane (LP) gas grills. Includes brass elbow with 1/4” compression fitting.

Part Number: CLA-VL0251
Material: brass
Weight: 0.15

6 deluxe chrome plated 22” shish-ke-bab skewers with wooden handles

Part Number: 40538
Material: chrome steel
Weight: 1.1

15” Stainless steel tong.

• Soft comfort grip
• Locking mechanism

Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14

economy basting brushes. Two brushes, 7.5” long.

Part Number: 43054
Weight: 0.1

Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.

Part Number: 24785
Dimensions: 7 1/2” x 16”
Weight: 1.5

Abrasive scrubbing brush. Ideal for cleaning porcelain grills.

Part Number: 71448
Weight: 0.2