DCS BGA27-BQL (pre 2006)

32217-R SS GRILL BURNER.
Premium quality stainless steel replacement tube burner.

Fits older BG27, BG36, BG48, BGA27, DCS27DS, DCS27FS, DCS36DS, DCS36E, and DCS48DS Professional Series grills by Dynamic Cooking Systems. Relaces original DCS part# 32217.

Replaces DCS factory part# DCS-32217

Part Number: DCS-32217-R
Dimensions: 19 1/4” x 6”
Material: stainless steel
Weight: 3.9

19014-03-R GRILL RACK S/S 27.
Premium quality heavy duty stainless steel grill rack with grid lifter notch. Our USA-made premium stainless cooking grids are simply the best obtainable.

Fits BGA27 Professional Series gas grills by Dynamic Cooking Systems.

• Replaces DCS factory part# 19014-03.
• Large diameter 5/16” stainless steel rods.
• Commercial grade polished 304 stainless steel.
• Dimensions: 19 1/2” x 12 3/4”
• Made in USA
• Sold individally.

Note: In later models, DCS changed the number of this part to 19495-02.

Part Number: DCS-19014-03-R
Dimension Front-to-Back: 19 1/2”
Dimension Side-to-Side: 12 3/4”
Material: stainless steel
Weight: 7.3

32291-02-R Radiant Assembly BGA/BGB or RADIANT>
Stainless steel Housing Radiant housing/Tray assembly. Fits BGA27, BGA36, BGA48, BGB36, and BGB48 Professional Series grills grills by Fisher & Paykel.

Includes:
• 32264-01 Radiant Cap
• 32218-02 Radiant

• Replaces factory part# 32291-02
• Premium grade 304 stainless steel
• Holds 18 ceramic rods (not included)
• Sold individually

NOTE: Part# 32291-02 is shown on some BGA27 models as the Radiant only, not an assembly, but is the same.

Part Number: DCS-32291-02-R
Dimensions: 18 5/8” x 9 7/8”
Material: stainless steel
Weight: 3.3

32224-R Ceramic Radiant Rods. Sometimes called CERAMIC ROD 9.50 (PKD).
Ceramic rods for radiant tray. 18 count. Fits many DCS Professional Series grills by Dynamic Cooking Systems.

• Replaces factory part# 32224
• Round ceramic rods are 9.5” long and 9/16” in diameter
• Sold as a package of 18 rods

Also available in a package of three. See part# CLA-MC0357.

Part Number: DCS-32224-R
Dimensions: 9 1/2” x 9/16”
Material: ceramic
Weight: 2.3

Ceramic radiant rods, package of three for DCS model BGA27-BQL (pre 2006).

Part Number: CLA-MC0357
Dimensions: 9 1/2” x 9/16”
Material: ceramic
Weight: 0.6

Igniter electrode kit. Sold individually. Fits both left and right hand side.

Includes:
• Collector box (replaces OEM part 32801 and 32210-01)
• Electrode with ceramic insulator and 30” wire (replaces OEM parts 16281, 16281-02, and 16281-03)
• Small sex change wire with female spade connector and male round connector. Required for some grills that use a female spade connection to the ignitor.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04850
Material: ceramic
Weight: 0.2

DCS (9 Volt) 4-Prong Spark Generator

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces DCS factory part# DCS-18349

Part Number: IGEIB14-B
Weight: 0.40

Universal 5 1/2” jumper wire with female spade ends to close off unused pair of outlets in battery-powered spark generator, or use as an adaptor wire.
NOTICE: EACH END HAS A PLASTIC PROTECTOR CAP.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03197
Weight: 0.05

Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

• Wire has female spade connector on one end and square plastic connector on the other
• Square plastice connector attaches to spark generator
• Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 03610
Weight: 0.05

24” LP hose and regulator with QCC-1 connection.

• For use on ”new style” QCC-1 tanks.
• Consists of hose part# 01000 and regulator part# 00920.
• Hose end with SAE 3/8” female flare fitting connects to grill.

Note: The grill must have a matching SAE 3/8” male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 3/8” fitting is much larger, approximately 5/8”. See our flare fitting description for information on measuring and sizes.

Replaces DCS factory part# DCS-13230

Part Number: 80012
Dimensions: 23 1/2” x 0 1/2”
Weight: 0.80

Brass valve for DCS.

• For LP and natural gas grills (see below)
• Off position D-Value: 12 o'clock
• Stem diameter: 8mm
• Orifice not included

NOTE: There is a set screw in the stem that allows this valve to be used in both LP or natural gas grills. The valve is shipped with the screw set in LP position. Turn the screw counterclockwise about seven turns for natural gas use.

Replaces DCS factory part# DCS-13017

Part Number: 30171
Dimensions: 3 7/16” x 1 5/16”
Material: brass
Weight: 0.3

6 chrome plated 18” shish-ke-bab skewers

Part Number: 63371
Weight: 0.2

16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.

Part Number: 40240
Material: chrome steel
Weight: 0.9

economy basting brushes. Two brushes, 7.5” long.

Part Number: 43054
Weight: 0.1

Upright porcelain steel roasting rack with grid topper.

Part Number: 40935
Weight: 2.9

Abrasive scrubbing brush. Ideal for cleaning porcelain grills.

Part Number: 71448
Weight: 0.2