DCS BG27-BQRL

304 Stainless steel 15,000 BTU infrared rotissierie burner. For use with both liquid propane (LP) and natural gas grills. Orifice not included. Use old orifice or purchase our orifice part# CLA-VL0251 for LP, or part# CLA-VB0246 for natural gas applications.

Dimensions:

• Maximum overall length, including mounting tab on one end: 20 7/8”
• Maximum width: 3 3/8”

Replaces DCS factory part# DCS-210357

Part Number: CLA-BS0250
Dimensions: 3 3/8” x 20”
Material: stainless steel and ceramic
Weight: 3.50

213995-R BURNER W/A.
Premium quality stainless steel replacement tube burner.

Fits BG27, BG36, BG48, BGA27, DCS27D, DCS27F, DCS36D, DCS36E, DCS48D, DCS48E Professional Series grills. Relaces original DCS part# 213995.

Replaces DCS factory part# DCS-213995

Part Number: DCS-213995-R
Dimensions: 19 1/4” x 6”
Material: stainless steel
Weight: 3.9

213997-R RADIANT BGA or HOUSING RADIANT BGB36-48.
Stainless steel Radiant. Fits many Professional Series grills by Fisher & Paykel.

• Replaces factory part# DCS-213997
• Includes 214046 End Cap Radiant & Hardware
• Premium grade 304 stainless steel
• Holds 18 ceramic rods
• Sold individually, number required varies by grill

Part Number: DCS-213997-R
Dimensions: 18 5/8” x 9 7/8”
Material: stainless steel
Weight: 3.3

214006P-R Ceramic Radiant Rods. Sometimes called CERAMIC ROD 9.50 (PKD). 18 count. Fits many DCS Professional Series grills.

• Replaces factory part# 214006P
• Round ceramic rods are 9.5” long and 9/16” in diameter
• Sold as a package of 18 rods

Also available in a package of three. See part# CLA-MC0357.

Part Number: DCS-214006P-R
Dimensions: 9 1/2” x 9/16”
Material: ceramic
Weight: 2.10

Ceramic radiant rods, package of three for DCS model BG27-BQRL.

Part Number: CLA-MC0357
Dimensions: 9 1/2” x 9/16”
Material: ceramic
Weight: 0.6

Igniter electrode kit. Sold individually. Fits both left and right hand side.

Includes:
• Collector box (replaces OEM part 32801 and 32210-01)
• Electrode with ceramic insulator and 30” wire (replaces OEM parts 16281, 16281-02, and 16281-03)
• Small sex change wire with female spade connector and male round connector. Required for some grills that use a female spade connection to the ignitor.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04850
Material: ceramic
Weight: 0.2

212333-R BATTERY IGN MODULE 9V ELTEC 4.
9 volt spark generator with remote push button. Fits BG27, BGA27 and BGB30 series Professional grills that require a 4 outlet igniter.

• Replaces factory part 212333
• Includes 212336 Igniter switch (button)
• Requires 9V battery (not included)
• Sold individually

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DCS-212333-R
Weight: 0.40

Universal 5 1/2” jumper wire with female spade ends to close off unused pair of outlets in battery-powered spark generator, or use as an adaptor wire.
NOTICE: EACH END HAS A PLASTIC PROTECTOR CAP.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03197
Weight: 0.05

Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

• Wire has female spade connector on one end and square plastic connector on the other
• Square plastice connector attaches to spark generator
• Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 03610
Weight: 0.05

24” LP hose and regulator with QCC-1 connection.

• For use on ”new style” QCC-1 tanks.
• Consists of hose part# 01000 and regulator part# 00920.
• Hose end with SAE 3/8” female flare fitting connects to grill.

Note: The grill must have a matching SAE 3/8” male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 3/8” fitting is much larger, approximately 5/8”. See our flare fitting description for information on measuring and sizes.

Replaces DCS factory part# DCS-210819P

Part Number: 80012
Dimensions: 23 1/2” x 0 1/2”
Weight: 0.80

Brass valve for DCS.

• For LP and natural gas grills (see below)
• Off position D-Value: 12 o'clock
• Stem diameter: 8mm
• Orifice not included

NOTE: There is a set screw in the stem that allows this valve to be used in both LP or natural gas grills. The valve is shipped with the screw set in LP position. Turn the screw counterclockwise about seven turns for natural gas use.

Replaces DCS factory part# DCS-210733

Part Number: 30171
Dimensions: 3 7/16” x 1 5/16”
Material: brass
Weight: 0.3

#59 brass orifice for rotisserie burner. Fits liquid propane (LP) gas grills. Includes brass elbow with 1/4” compression fitting.

Part Number: CLA-VL0251
Material: brass
Weight: 0.15

Cast iron smoker box with six oblong venting holes. Designed to release wood smoke. Make sure this part will fit into your grill before ordering 8 3/8” x 5 1/4” x 1 3/8”.

Part Number: 00150
Dimensions: 5 1/4” x 8 3/8”
Material: cast iron
Weight: 3.90

16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.

Part Number: 40240
Material: chrome steel
Weight: 0.9

Deluxe 13” basting mop with hardwood handle and cotton mop head.

Part Number: 42055
Dimensions: 13
Weight: 0.2

Cast aluminum griddle

Part Number: 91652
Dimensions: 19 1/2” x 10 3/4”
Material: aluminum
Weight: 3.0

deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.

Part Number: 70255
Dimensions: 18 5/8” x 3 1/2”
Weight: 0.7