Costco CS812

Premium grade quality stainless steel tube burner for Costco model CS812.

Replaces Costco factory part# FCCS3308005

Part Number: CLA-BS0225
Dimensions: 17 7/8” x 3/4”
Material: stainless steel
Weight: 0.35

Stainless Steel Burner For Tuscany & Perfect Flame Gill Models for Costco model CS812.

Replaces Costco factory part# FCCS3308005

Part Number: TUST1
Dimensions: 17 7/8
Material: stainless steel
Weight: 1.0

Stainless steel carryover. Made in USA .

Part Number: CLA-MS0098
Dimensions: 2 7/8” x 15”
Material: stainless steel
Weight: 0.55

Large Flavor Grid. Stainless steel. Only one of these are used on the grill. This part has an extended side that faces the infrared burner and acts as a heat shield. The other Flavor Grids do not have this shield.

• One required per grill.
• Sold individually.
• Made in USA .

NOTE: Sometimes shipped with protective vinyl peel-off coating. Remove before use. Made in USA

Part Number: CLA-TS0072
Dimension Front-to-Back: 15 3/16”
Dimension Side-to-Side: 5 7/16”
Material: stainless steel
Weight: 1.2

Flavor grid, stainless steel. Made in USA .

NOTE: Sometimes shipped with protective vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0140
Dimension Front-to-Back: 15 3/16”
Dimension Side-to-Side: 5 7/16”
Material: stainless steel
Weight: 0.98

Porcelain steel Flavor Grid. Sold individually, number required varies by grill.

Replaces Costco factory part# FCCS0007004

Part Number: 93031
Dimension Front-to-Back: 15 3/16”
Dimension Side-to-Side: 5 7/16”
Material: porcelain steel
Weight: 1.1

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

Genuine OEM 21” wire for side burner or other applications. Both ends are female spade connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-T12
Dimensions: 21
Weight: 0.05

Universal battery powered push button ignitor.

• 1.5 volt
• Has six (6) terminals (male spade connector)
• Uses a single AA battery (not included))
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole
• Overall dimensions: 2” x 3 3/8” x 3”
• Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Costco factory part# FCCS3308012

Part Number: 03350
Weight: 0.7

Ceramic electrode with mounting hardware.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 01683
Material: ceramic
Weight: 0.1

Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

• Wire has female spade connector on one end and square plastic connector on the other
• Square plastice connector attaches to spark generator
• Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 03610
Weight: 0.05

14” ground wire with female spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03620
Weight: 0.1

Ceramic electrode and 40” wire with female spade connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 06730
Material: ceramic
Weight: 0.1

Stainless steel bread warming rack. Replaces OEM # FCCS3308002. Can also be used as an alternative warming rack for delicate foods like vegetabes and seafood. Made in USA

Part Number: CLA-WS0247
Material: stainless steel
Weight: 1.90

Skewers for part 92339 kebob tray.

Part Number: 11040
Weight: 0.4

16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.

Part Number: 40240
Material: chrome steel
Weight: 0.9

Marinade Injector.

For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.

Part Number: 14950
Material: stailess steel
Weight: 0.5

Stainless steel WOK topper with serving handles. Ideal for seafood and vegatables.

Part Number: 96321
Dimensions: 12 3/4” x 12 3/4”
Material: stainless steel
Weight: 1.6

Deluxe venturi brush with 11” coil spring flexible shaft

Part Number: 77310
Weight: 0.3