Costco CGR30

Shopping cart
replacement grill parts for all BBQ brands including DCS, Members Mark, Masterforge, Ducane, Kenmore, Broilmaster and more.Shopping cart
 
   Home > Costco Grill Models > Costco CGR30

Sonoma 30" Platinum Edition gas grill



Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Costco grill.

Replacement BBQ grill parts for Costco model: CGR30


 

CGR30 Burners

Premium quality stainless steel tube burner for Costco model CGR30.

Part Number: CLA-BS0203
Dimensions: 21 1/2” x 21 1/2”
Material: stainless steel
Weight: 1.6

$68.46

Qty
 




Stainless steel triple burner set for Costco model CGR30.

Part Number: SONT3
Dimensions: 17 13/16” x 18 1/2”
Material: stainless steel
Weight: 1.6

$68.26

Qty
 






 

CGR30 Burner Brackets and Carryovers

Stainless steel Z-Bar burner support bracket. Made in USA

Part Number: CLA-MS0116
Dimensions: 2” x 23”
Material: stainless steel
Weight: 0.70

$55.31

Qty
 






 

CGR30 Cooking Grids

Stainless steel cooking grids with solid 1/4” rods (set of 3) for Costco model CGR30.

Part Number: 53S33
Dimension Front-to-Back: 17 1/2”
Dimension Side-to-Side: 27 3/8”
Material: stainless steel wire
Weight: 10.0

$194.98

Qty
 






 

CGR30 Flavor Grids

Bottom Flavor Grid. Stainless steel. Made in USA .

Part Number: CLA-MS0181
Dimension Front-to-Back: 12”
Dimension Side-to-Side: 5 7/16”
Material: stainless steel
Weight: 0.70

$25.76

Qty
 




Flavor grid, stainless steel. Made in USA .

NOTE: Sometimes shipped with protective vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0140
Dimension Front-to-Back: 15 3/16”
Dimension Side-to-Side: 5 7/16”
Material: stainless steel
Weight: 0.98

$28.91

Qty
 




Upper flavor grid. Stainless steel. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

NOTE: Has unique underside, see photos.

Part Number: CLA-TS0182
Dimension Front-to-Back: 15 3/16”
Dimension Side-to-Side: 5 1/2”
Material: stainless steel
Weight: 1.2

$36.41

Qty
 




Porcelain steel Flavor Grid. Sold individually, number required varies by grill.

Part Number: 93031
Dimension Front-to-Back: 15 3/16”
Dimension Side-to-Side: 5 7/16”
Material: porcelain steel
Weight: 1.1

$27.53

Qty
 






 

CGR30 Igniter Components

Genuine OEM 21” wire for side burner or other applications. Both ends are female spade connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 10342-T12
Dimensions: 21
Weight: 0.05

$4.21

Qty
 




Ceramic electrode with mounting hardware.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 01683
Material: ceramic
Weight: 0.1

$12.47

Qty
 




Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

  • Wire has female spade connector on one end and square plastic connector on the other
  • Square plastice connector attaches to spark generator
  • Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.



Part Number: 03610
Weight: 0.05

$9.07

Qty
 






 

CGR30 Miscellaneous Repair Parts

Electrode heat shield. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-MS0085
Dimensions: 16 13/16
Material: stainless steel
Weight: 0.4

$25.56

Qty
 






 

CGR30 Accessories

Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10” x 13 3/4”.

Part Number: 41338
Weight: 1.1

$22.60

Qty
 




Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.



Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5

$16.16

Qty
 




Marinade Injector.

For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.



Part Number: 14950
Material: stailess steel
Weight: 0.5

$14.41

Qty
 




Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.
  • Ideal for cooking pieces of meat or vegetables
  • Self basting, easy to use
  • Locks on spit rod with thumb screw (supplied)
  • 6 1/2” x 10” long


Part Number: 24764
Dimensions: 6 1/2” x 10”
Weight: 1.1

$19.30

Qty
 




Deluxe venturi brush with 11” coil spring flexible shaft

Part Number: 77310
Weight: 0.3

$9.31

Qty
 





Costco CGR30. We have a large inventory of BBQ accessories such as BBQ tools, baskets,
grill covers in our accessories section. 05-Sep-24



We ship Costco BBQ parts worldwide

Back to Costco grill parts



GRILLING  ACCESSORIES
Briquettes & Lava Rock
Grill Covers
Grilling Tools
Basting and Cleaning brushes
Wood Chips and Smoker Trays
Grid Toppers, Griddles & Racks
Fish and burger baskets
Grill and Tank Accessories
Shish-kebab Sets & Skewers
Grilling & outdoor cooking books

USA shipping (contiguous 48 states only) on all Costco part orders $49 and more

Copyright © 2004, 2008, 2020 clagrills.com All rights reserved
Build date: Thursday, September 5, 2024

All trademarks the property of their respective owners, and are not affiliated with CLA Grills & Service or it's products.

Help Center     About Us     Contact us     Shipping Policy     Return Policy     Privacy Policy