Parts for Charbroil 4736232307

Home > Charbroil Grill Models > Charbroil 4736232307

Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Charbroil grill.

Replacement grill parts for Charbroil model: 4736232307

4736232307 Burners

Stainless steel burner for Charbroil model 4736232307.

Part Number: 15491
Dimensions: 14 3/8” x 1”
Material: stainless steel
Weight: 0.9

$34.77

All Charbroil Burners

4736232307 Burner Brackets and Carryovers

stainless steel cross-over burner for Charbroil model 4736232307.

Part Number: 05592
Dimensions: 6 3/8” x 0 13/16”
Material: stainless steel
Weight: 0.1

$14.85

All Charbroil Burner Brackets and Carryovers

4736232307 Cooking Grids

Cast Iron Cooking Grid - Charbroil for Charbroil model 4736232307.

Part Number: CG-97P-CI
Dimension Front-to-Back: 16 7/8”
Dimension Side-to-Side: 9 5/16”
Material: cast iron
Weight: 4.65

$31.88

Cast iron cooking grids. Porcelain enameled, glossy finish. Sold as a set of four (4).

Part Number: 68764
Dimension Front-to-Back: 16 7/8”
Dimension Side-to-Side: 37 1/4”
Material: gloss cast iron
Weight: 18.1

$127.35

All Charbroil Cooking Grids

4736232307 Heat Tents

Stainless steel aftermarket vented Heat Tent.

Stainless equivalent of part 98531
Sold individually
Made in USA

Part Number: 98531-SS
Dimension Front-to-Back: 14 5/8”
Dimension Side-to-Side: 4 1/4”
Material: stainless steel
Weight: 0.7

$23.47

Porcelain steel Heat Tent. Sold individually. Fits many Urban, Range Master, Kenmore, Thermos and Char-Broil Classic grills.

This part replaces original part numbers: 80008530, 80029725, G430-0005-W1.

Part Number: 98531
Dimension Front-to-Back: 14 5/8”
Dimension Side-to-Side: 4 1/4”
Material: porcelain steel
Weight: 0.6

$38.35

$23.49

All Charbroil Heat Tents

4736232307 Igniter Components

Push-button electronic igniter with four (4) spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: TS-IG4010
Weight: 0.2

$18.48

Burner mounted electrode for use with 15591 and 15491 burners.

39” wire with female spade connector
Includes adapter wire part 03198 for applications needing male spade connector on electrode.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04430
Material: ceramic
Weight: 0.1

$12.47

Battery powered push button igniter.

Has four (4) spade type male connectors.
Uses 1 AAA battery (not supplied)
Requires 3/4” or 13/16” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB4-B
Weight: 0.3

$34.08

Universal four-outlet battery powered push button ignitor.

1.5 volt
Has four (4) terminals (male spade connector)
Uses a single AA battery (not included)
03610 and 03620 wires are commonly used with this igniter (not included)
Requires 7/8” mounting hole
Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03340
Weight: 0.5

$31.50

Burner mounted replacement electrode for use with burner 15641.

Ceramic insulator
Wire with female spade connector

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03351
Material: ceramic
Weight: 0.2

$12.96

Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

Wire has female spade connector on one end and square plastic connector on the other
Square plastice connector attaches to spark generator
Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 03610
Weight: 0.05

$9.07

14” ground wire with female spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03620
Weight: 0.1

$6.55

All Charbroil Igniter Components

4736232307 Accessories

shishkebob skewers

Part Number: 46074
Dimensions: 18” x 0 5/8”
Material: stainless steel
Weight: 0.4

$7.65

Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.

Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5

$16.16

Deluxe 13” basting mop with hardwood handle and cotton mop head.

Part Number: 42055
Dimensions: 13
Weight: 0.2

$8.76

Stainless steel WOK topper with serving handles. Ideal for seafood and vegatables.

Part Number: 96321
Dimensions: 12 3/4” x 12 3/4”
Material: stainless steel
Weight: 1.6

$22.70

Replacement heads for grill brush 77600. Set of two.

Part Number: 77650
Weight: 0.3

$6.73

All Accessories

Copyright © 2004, 2008, 2020 clagrills.com All rights reserved
Build date: Thursday, September 5, 2024

All trademarks the property of their respective owners, and are not affiliated with CLA Grills & Service or it's products.