Charbroil 466642316 (Commercial Infrared)

Stainless steel 5/8” tube burner for Charbroil model 466642316.

Replaces Charbroil factory part# G466-2500-W1

Part Number: 14761
Dimensions: 14 3/4” x 5/8”
Material: stainless steel
Weight: 0.3

Burner crossover tube for Charbroil model 466642316.

Replaces Charbroil factory part# G359-0009-W1

Part Number: 05591
Dimensions: 8 13/16” x 0 3/4”
Material: stainless steel
Weight: 0.1

Porcelain ”stamped” steel cooking grids. Porcelain enameled, glossy finish. Sold as a set of three (3).

Part Number: 53073
Dimension Front-to-Back: 16 15/16”
Dimension Side-to-Side: 27 9/16”
Material: porcelain steel
Weight: 9.3

Stainless steel cooking grid. Sold as a set of two (2).

Part Number: 5S322
Dimension Front-to-Back: 17”
Dimension Side-to-Side: 16 3/8”
Material: stainless steel wire
Weight: 6.1

Stainless steel Heat Tent. Sold individually.

Replaces Charbroil factory part# G466-0024-W1

Part Number: 92171
Dimension Front-to-Back: 15 1/4”
Dimension Side-to-Side: 1 13/16”
Material: stainless steel
Weight: 0.6

Ignition module switch for spark generators that accept wired remote (button) trigger switches. Fits our spark generator part numbers 03322, 03332, 03344, 03352, 03356, 03387 and 03388.
Includes:

• Push-button ignition module switch with two male spade connectors on back
• Two 20” wires with female spade connectors
• One plastic mounting nut

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03152
Dimensions: 17 3/4” x 1”
Weight: 0.1

Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger.

• 1.5 volt
• Has two (2) spark outlets (male spade connector)
• Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
• Uses a single AA battery (not included)
• Requires 7/8” mounting hole

NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Charbroil factory part# G350-0017-W1

Part Number: 03322
Dimensions: 2 5/8” x 2”
Weight: 0.5

Ignition electrode.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Charbroil factory part# G362-0023-W1

Part Number: 04450
Dimensions: 3 5/16” x 0 7/8”
Weight: 0.1

Round 2 3/8” diameter heat indicator, includes one wing nut and one locking nut.

• Requires minimum 3/8” mounting hole
• Single 1 3/8” probe
• Threaded portion of probe stops at 1/2” from base
• See photo for details

Replaces Charbroil factory part# G466-0003-W1

Part Number: 00012
Dimensions: 2 3/8” x 2 3/8”
Weight: 0.1

10” Bamboo Skewers (100 pieces)

• Ideal for grilling meat and vegetables
• Soak skewers in water about 1/2 hour before using
• Use foods that require the same amount of cooking time. Meats can be pre-cooked. Marinated foods are recommended for added flavor.
• Great for chicken or beef, ham, lamb, or veal, salami, shrimp, or scallops, mushrooms, sliced peppers, omion, carrots, cherrytomatoes, pineapples, zuccini, and apples.

Part Number: 11060
Weight: 0.6

20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.

Part Number: 40269
Material: stainless steel
Weight: 0.14

Deluxe 13” basting mop with hardwood handle and cotton mop head.

Part Number: 42055
Dimensions: 13
Weight: 0.2

Upright porcelain steel roasting rack with grid topper.

Part Number: 40935
Weight: 2.9

Replacement heads for grill brush 77600. Set of two.

Part Number: 77650
Weight: 0.3