Charbroil 463350505 (Performance)

Stainless steel burner for Performance and Advantage series grills for Charbroil model 463350505.

Replaces Charbroil factory part# 7000083

Part Number: 14631
Dimensions: 13 11/16” x 3 3/8”
Material: stainless steel
Weight: 0.9

Porcelain steel cooking grids. Porcelain enameled, glossy finish. Sold as a set of two (2).

Replaces Charbroil factory part# 7000023

Part Number: 54632
Dimension Front-to-Back: 14 15/16”
Dimension Side-to-Side: 23 7/8”
Material: porcelain steel wire
Weight: 6.13

Premium stainless steel cooking grids. Set of two (2) grids. Far superior to porcelain coated steel grids.

• Made in USA
• Commercial grade 304 stainless steel
• .225” solid stainless rods
• Sold as a set of two (2).

Each panel measures:

• Front-to-Back: 15”
• Side-to-Side: 11 3/8”

Total Side-to-Side: 22 3/4”

Part Number: 54632-SS-X2
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 22 3/4”
Material: stainless steel
Weight: 6.8

Premium quality stainless steel cooking grid. Far superior to the porcelain coated steel grids it replaces.

• Made in USA
• 304 commercial grade stainless steel
• Solid .225 diameter stainless rods
• Sold individually

Fits grills by Arkla, Falcon, Charbroil, Kenmore and Thermos. May fit others.

Part Number: 54632-SS
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 11 3/8”
Material: stainless steel
Weight: 3.40

SET OF THREE/3 PACK Stainless steel heat plate. Made in USA .

Note: Not identical to original, but a fully functional replacement.

Note: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0144-X3
Dimension Front-to-Back: 11 3/4”
Dimension Side-to-Side: 5 9/16”
Material: stainless steel
Weight: 1.8

Stainless steel heat plate. Made in USA .

Note: Not identical to original, but a fully functional replacement.

Note: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0144
Dimension Front-to-Back: 11 3/4”
Dimension Side-to-Side: 5 9/16”
Material: stainless steel
Weight: 0.60

Porcelain steel Vaporiser Tent. Sold individually.

Replaces Charbroil factory part# 7000044

Part Number: 94631
Dimension Front-to-Back: 11 3/4”
Dimension Side-to-Side: 5 5/8”
Material: porcelain steel
Weight: 1.0

Push-Button self-grounding piezo spark generator. Has round male connector, so connecting wire needs to be female round connector. If needed, see part# 03199C for a short adapter wire that converts flat female spade connectors to female round. For more information, see our help center article Ignition 101.

Replaces Charbroil factory part# 4153713

Part Number: 03100
Weight: 0.1

Universal 2 3/4” adaptor wire with a round female end and a male spade end that has a protective cover.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03199C
Weight: 0.05

Ceramic electrode for use with CBP1-CI cast iron burner.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-24B
Weight: 0.3

Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

• Wire has female spade connector on one end and square plastic connector on the other
• Square plastice connector attaches to spark generator
• Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 03610
Weight: 0.05

14” ground wire with female spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03620
Weight: 0.1

Round heat indicator.

• Single probe
• 1 13/16” diameter
• Requires 3/8” mounting hole

Replaces Charbroil factory part# 4157171

Part Number: 00018
Dimensions: 1 13/16” x 1 13/16”
Weight: 0.1

Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10” x 13 3/4”.

Part Number: 41338
Weight: 1.1

15” Stainless steel tong.

• Soft comfort grip
• Locking mechanism

Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14

Marinade Injector.

For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.

Part Number: 14950
Material: stailess steel
Weight: 0.5

Upright porcelain steel roasting rack with grid topper.

Part Number: 40935
Weight: 2.9

Deluxe venturi brush with 11” coil spring flexible shaft

Part Number: 77310
Weight: 0.3