Charbroil 463241313 (Commercial)

Stainless steel burner for Charbroil model 463241313.

Part Number: 14741
Dimensions: 15 15/16” x 1”
Material: stainless steel
Weight: 0.5

Stainless steel cross-over burner for Charbroil model 463241313.

Replaces Charbroil factory part# G354-0024-W1

Part Number: 05596
Dimensions: 8 1/2” x 0 3/4”
Material: stainless steel
Weight: 0.1

Cast iron cooking grids. Porcelain treated, flat matte finish. Sold as a set of three (3).

Part Number: 61123
Dimension Front-to-Back: 18 5/16”
Dimension Side-to-Side: 24 15/16”
Material: matte cast iron
Weight: 19.2

Cast iron cooking grids. Porcelain treated, flat matte finish. Sold as a set of two (2).

Replaces Charbroil factory part# 80021355

Part Number: 61122
Dimension Front-to-Back: 18 5/16”
Dimension Side-to-Side: 16 5/8”
Material: matte cast iron
Weight: 12.7

Infrared Cooking Grate Emitter. This replaces the Charbroil infrared emitter tray which, when paired with our CG-111PCI Cast Iron Cooking Grate, radiates and transmits heat to grill food without exposure to flame. If the part is heavily rusted or damaged it needs to be replaced.

CG-111SS stainless steel emitter is sold individually—more than one may be required for your grill. This emitter tray is designed to be paired with CG-111P-CI cast iron cooking grate—which is sold separately.

See part CG-111SET for an emitter and grate sold as a set of two.

Part Number: CG-111SS
Dimension Front-to-Back: 18 1/4”
Dimension Side-to-Side: 8 7/8”
Material: stainless steel
Weight: 1.75

Stamped stainless steel cooking grids (set of 3). Each grid is a grid-in-tray assembly, so there is actually a total of 6 pieces.

Part Number: 5S483
Dimension Front-to-Back: 18 7/16”
Dimension Side-to-Side: 26 5/8”
Material: stamped stainless steel
Weight: 15.4

Infrared Emitter and Cast Iron Cooking Grate set. This set of two pieces replaces the Charbroil infrared emitter tray (IR housing) AND the cast iron cooking grate.

Includes:

• One (1) CG-111SS stainless steel Emitter Tray
• One (1) CG-111PCI cast iron cooking grate 18 1/4” x 8 1/4”.

CG-111PCI grid rests on top of emitter tray CG-111SS. Multiple sets required, number varies by grill model.

Part Number: CG-111SET
Dimension Front-to-Back: 18 1/4”
Dimension Side-to-Side: 8 7/8”
Material: stainless steel
Weight: 8.25

Stamped stainless steel cooking grids. SOLD AS A SET OF THREE (3) PIECES ONLY.
WARNING: This cooking grid set does not include the bottom trays. For the grid in tray set see part # 5S483.

Part Number: 5S473
Dimension Front-to-Back: 18 7/16”
Dimension Side-to-Side: 26 5/8”
Material: stamped stainless steel
Weight: 8.0

Porcelain steel Heat Tent. Sold individually.

Replaces Charbroil factory part# G527-0013-W1

Part Number: 97321
Dimension Front-to-Back: 16 7/16”
Dimension Side-to-Side: 3 3/4”
Material: porcelain steel
Weight: 0.7

Ignition module switch for spark generators that accept wired remote (button) trigger switches. Fits our spark generator part numbers 03322, 03332, 03344, 03352, 03356, 03387 and 03388.
Includes:

• Push-button ignition module switch with two male spade connectors on back
• Two 20” wires with female spade connectors
• One plastic mounting nut

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03152
Dimensions: 17 3/4” x 1”
Weight: 0.1

Universal 2 3/4” adaptor wire with a round female end and a male spade end that has a protective cover.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03199C
Weight: 0.05

Electrode, gas collector box, and wire. The connecting wire has a flat female spade connector, which is typically used with electronic (battery operated) ignitors (see Ignition 101 in our help center).

NOTE: This electrode is also sometimes used with push-button or rotary piezo ignitors, such as our part# 03100 and 03120, which have round connectors. When connecting 01472 electrode to ignitors with round connectors, use short wire part# 03199C to convert the electrode wire from a femal spade connector to a female round connector.

Replaces Charbroil factory part# G350-0064-W1

Part Number: 01472
Material: ceramic
Weight: 0.1

Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger.

• 1.5 volt
• Has four(4) spark outlets (male spade connector)
• Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
• Uses a single AA battery (not included)
• Requires 7/8” mounting hole

NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Charbroil factory part# G511-0055-W1

Part Number: 03344
Dimensions: 2” x 2 1/2”
Weight: 0.5

Semi-circular, snap in heat indicator with 3 3/4” heat prob for Charbroil model 463241313.

Replaces Charbroil factory part# G527-0012-W1

Part Number: 00472
Dimensions: 1 3/4” x 1 1/4”
Material: stainless steel
Weight: 0.01

Skewers for part 92339 kebob tray.

Part Number: 11040
Weight: 0.4

20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.

Part Number: 40269
Material: stainless steel
Weight: 0.14

Marinade Injector.

For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.

Part Number: 14950
Material: stailess steel
Weight: 0.5

Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.

• Ideal for cooking pieces of meat or vegetables
• Self basting, easy to use
• Locks on spit rod with thumb screw (supplied)
• 6 1/2” x 10” long

Part Number: 24764
Dimensions: 6 1/2” x 10”
Weight: 1.1

EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.

Part Number: 00030
Weight: 0.1