Charbroil 463241013 (Commercial)

Stainless steel burner for Charbroil model 463241013.

Replaces Charbroil factory part# G356-2200-W1

Part Number: 14741
Dimensions: 15 15/16” x 1”
Material: stainless steel
Weight: 0.5

Stainless steel cross-over burner for Charbroil model 463241013.

Replaces Charbroil factory part# G354-0024-W1

Part Number: 05596
Dimensions: 8 1/2” x 0 3/4”
Material: stainless steel
Weight: 0.1

Cast iron cooking grids. Porcelain treated, flat matte finish. Sold as a set of two (2).

Replaces Charbroil factory part# G526-0007-W1

Part Number: 61122
Dimension Front-to-Back: 18 5/16”
Dimension Side-to-Side: 16 5/8”
Material: matte cast iron
Weight: 12.7

Infrared Cooking Grate Emitter. This replaces the Charbroil infrared emitter tray which, when paired with our CG-111PCI Cast Iron Cooking Grate, radiates and transmits heat to grill food without exposure to flame. If the part is heavily rusted or damaged it needs to be replaced.

CG-111SS stainless steel emitter is sold individually—more than one may be required for your grill. This emitter tray is designed to be paired with CG-111P-CI cast iron cooking grate—which is sold separately.

See part CG-111SET for an emitter and grate sold as a set of two.

Part Number: CG-111SS
Dimension Front-to-Back: 18 1/4”
Dimension Side-to-Side: 8 7/8”
Material: stainless steel
Weight: 1.75

Infrared Emitter and Cast Iron Cooking Grate set. This set of two pieces replaces the Charbroil infrared emitter tray (IR housing) AND the cast iron cooking grate.

Includes:

• One (1) CG-111SS stainless steel Emitter Tray
• One (1) CG-111PCI cast iron cooking grate 18 1/4” x 8 1/4”.

CG-111PCI grid rests on top of emitter tray CG-111SS. Multiple sets required, number varies by grill model.

Part Number: CG-111SET
Dimension Front-to-Back: 18 1/4”
Dimension Side-to-Side: 8 7/8”
Material: stainless steel
Weight: 8.25

Ignition module switch for spark generators that accept wired remote (button) trigger switches. Fits our spark generator part numbers 03322, 03332, 03344, 03352, 03356, 03387 and 03388.
Includes:

• Push-button ignition module switch with two male spade connectors on back
• Two 20” wires with female spade connectors
• One plastic mounting nut

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03152
Dimensions: 17 3/4” x 1”
Weight: 0.1

Universal 2 3/4” adaptor wire with a round female end and a male spade end that has a protective cover.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03199C
Weight: 0.05

Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger.

• 1.5 volt
• Has two (2) spark outlets (male spade connector)
• Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
• Uses a single AA battery (not included)
• Requires 7/8” mounting hole

NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Charbroil factory part# G350-0017-W1

Part Number: 03322
Dimensions: 2 5/8” x 2”
Weight: 0.5

Electrode, gas collector box, and wire. The connecting wire has a flat female spade connector, which is typically used with electronic (battery operated) ignitors (see Ignition 101 in our help center).

NOTE: This electrode is also sometimes used with push-button or rotary piezo ignitors, such as our part# 03100 and 03120, which have round connectors. When connecting 01472 electrode to ignitors with round connectors, use short wire part# 03199C to convert the electrode wire from a femal spade connector to a female round connector.

Replaces Charbroil factory part# G350-0064-W1

Part Number: 01472
Material: ceramic
Weight: 0.1

Semi-circular, snap in heat indicator with 3 3/4” heat prob for Charbroil model 463241013.

Replaces Charbroil factory part# G527-0012-W1

Part Number: 00472
Dimensions: 1 3/4” x 1 1/4”
Material: stainless steel
Weight: 0.01

6 chrome plated 18” shish-ke-bab skewers

Part Number: 63371
Weight: 0.2

Deluxe 17” stainless steel turner.

• Soft comfort rubber grip
• Stainless steel blade

Part Number: 43108
Material: stainless steel
Weight: 0.10

economy basting brushes. Two brushes, 7.5” long.

Part Number: 43054
Weight: 0.1

Stainless steel chicken roaster. Commonly called Beer Can roasters.

• The best way to roast poultry on the grill
• For use in barbecues and ovens
• Dishwasher safe
• Includes rack, rack support, and basting brush

Part Number: 41333
Material: stainless steel
Weight: 0.10

Abrasive scrubbing brush. Ideal for cleaning porcelain grills.

Part Number: 71448
Weight: 0.2