Parts for Char-Griller 4000

Home > Char-Griller Grill Models > Char-Griller 4000

Char-Griller Grillin' Pro 4000 4-Burner LP gas grill

Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Char-Griller grill.

Part diagrams and owners manuals for Char-Griller model: 4000

Click small image to enlarge. Click Large image to reduce.
Double click for new window

Replacement grill parts for Char-Griller model: 4000

4000 Burners

Stainless steel tube burner. Includes

SS tube burner
Electrode mounting bracket
Spider exclusion screen
Adjustable air shutter.

Part Number: 15051
Dimensions: 20 1/8” x 1”
Material: stainless steel
Weight: 0.90

stainless steel burner for Char-Griller model 4000

$34.77

All Char-Griller Burners

4000 Heat Plates

SET OF THREE/3 PACK Stainless steel heat plate/Flame Tamer. Made in USA

.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0146-X3
Dimension Front-to-Back: 18 7/8”
Dimension Side-to-Side: 3 13/16”
Material: stainless steel
Weight: 2.4

$54.45

Stainless steel heat plate/Flame Tamer. Made in USA

.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0146
Dimension Front-to-Back: 18 7/8”
Dimension Side-to-Side: 3 13/16”
Material: stainless steel
Weight: 0.8

$20.34

Porcelain steel heat plate. Sold individually.

Part Number: 95051
Dimension Front-to-Back: 18 15/16”
Dimension Side-to-Side: 3 7/8”
Material: porcelain steel
Weight: 1.2

$30.18

$22.65

All Char-Griller Heat Plates

4000 Igniter Components

Push-button electronic igniter with four (4) spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: TS-IG4010
Weight: 0.2

$18.48

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

$7.10

Battery powered push button igniter.

Has four (4) spade type male connectors.
Uses 1 AAA battery (not supplied)
Requires 3/4” or 13/16” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB4-B
Weight: 0.3

$34.08

Universal four-outlet battery powered push button ignitor.

1.5 volt
Has four (4) terminals (male spade connector)
Uses a single AA battery (not included)
03610 and 03620 wires are commonly used with this igniter (not included)
Requires 7/8” mounting hole
Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03340
Weight: 0.5

$31.50

Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

Wire has female spade connector on one end and square plastic connector on the other
Square plastice connector attaches to spark generator
Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 03610
Weight: 0.05

$9.07

14” ground wire with female spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03620
Weight: 0.1

$6.55

Burner mounted electrode with male spade connector. Includes small mounting bolt and nut.

Wire not included. Commonly used with wire part# 03610.
Female spade connector on wire connects to male spade connector of electrode.
If used with existing wire, confirm connecting end of wire is a female spade connector
Usually, one electrode required per burner

NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Also available in more economical 2, 3, 4, and 5 piece multi-packs. See part 04010-X2, X3, X4, and X5.

Part Number: 04010
Material: ceramic
Weight: 0.05

$6.55

All Char-Griller Igniter Components

4000 Accessories

Skewers for part 92339 kebob tray.

Part Number: 11040
Weight: 0.4

$4.75

15” Stainless steel tong.

Soft comfort grip
Locking mechanism

Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14

$9.92

Marinade Injector.

For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.

Part Number: 14950
Material: stailess steel
Weight: 0.5

$14.41

Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.

Ideal for cooking pieces of meat or vegetables
Self basting, easy to use
Locks on spit rod with thumb screw (supplied)
6 1/2” x 10” long

Part Number: 24764
Dimensions: 6 1/2” x 10”
Weight: 1.1

$19.30

Deluxe venturi brush with 11” coil spring flexible shaft

Part Number: 77310
Weight: 0.3

$9.31

All Accessories

Copyright © 2004, 2008, 2020 clagrills.com All rights reserved
Build date: Thursday, September 5, 2024

All trademarks the property of their respective owners, and are not affiliated with CLA Grills & Service or it's products.