Broilmaster P3SX

B101512 Stainless steel Bowtie burner assembly for P3X Series grills. Includes:

• Stainless steel Bowtie burner
• Stainless steel twin venturi with spider exclusion screens
• Gasket and venturi mounting screws
• Assembly and installation instructions

Genuine Broilmaster factory part. Also known as DPP111.

Part Number: B101512
Weight: 1.0

Stainless steel rod cooking grids for size 3 grill head (set of 2).

• Heavy gauge 8mm rod construction
• Restaurant quality stainless steel
• 2 piece set
• Fits: P3, D3, DU3, R3, U3, S3, G3, and R3.

Note: This is the same as part# B101281. Also replaces cast iron grid DPP103, which is no longer available.

Part Number: DPA111
Dimension Front-to-Back: 17 1/8”
Dimension Side-to-Side: 25 1/2”
Material: Stainless steel
Weight: 15.8

Briquette Rack. Fits all size 3 grill head models. Manufacturer's Note: Some versions of this rack may include stainless steel extension brackets. See part DPA116 for Ceramic Flare Busters.

Part Number: B101061
Dimensions: 13 13/16” x 23 7/8”
Material: porcelain steel
Weight: 5.4

B063065 Radiation Shield (Heat & Wind Deflector), Fits All Models.

Genuine Broilmaster factory part. Also known as DPP7SS.

Part Number: B063065
Weight: 1.0

Flare Busters Flat Ceramic Pads. For P3, T3, D3, H3. Package of 12. Each tile measures 7 1/4 ” x 3 1/2”. Used with B101061 rack.

Part Number: DPA116
Dimension Front-to-Back: 7 1/4”
Dimension Side-to-Side: 3 1/2”
Material: ceramic
Weight: 4.5

Electronic ignitor head with two (2) male spade connectors. Fits 3/P4/P5/D3/D4

• Uses 1 AA battery (not included)
• Requires 7/8” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: B072218
Weight: 0.2

Ground Wire, Fits All Electronic Models

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: B072684
Weight: 0.1

Ground Lug, Fits All Models

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: B069747
Weight: 0.01

Collector Box Spacer, Fits P 3/4 D 3/4/5

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: B069743
Weight: 0.01

Collector Box (Electronic Ignitor), electrode, & connector wire with female spade end. Fits P3/P4

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: B100446
Weight: 0.2

Knob, Black (New Style), Fits P3/4/4, SR3, D3/4/5/2.
Also replaces part# B070286, which no longer available.

• Off position D-Value: 3 o'clock
• Knob diameter: 1 5/8”
• Socket diameter: 5/16”
• Knob shaft: 1/2”

Part Number: B070084
Weight: 0.04

Universal bolt-on heat indicator replaces most factory installed indicators with 1 1/2” bolt centers. Stainless steel case.

Part Number: TG-2B
Weight: 0.2

High quality, long lasting ceramic briquettes. 59 flat top pyramid-shaped briquettes per box. Placed 1/2” apart, 59 briquetes will cover about 368 square inches. This is an area roughly 15” x 24”.

• Top quality product
• Each briquette measure 2” x 2”
• Self cleaning
• Great heat distibution, retains heat longer
• Can be used on all grills that use briquettes or lava rock
• Use a single layer (multiple layers can reduce temperatures)

NOTE: These high quality ceramic briquetes are available in 59 count, 70 count, and 90 count qantities.

• 59 briquetes covers an area apprimately 15” x 24”
• 70 briquetes covers an area apprimately 17” x 26”
• 90 briquetes covers an area apprimately 17” x 33”

Made in USA

Part Number: CLA-AC0394
Dimensions: 2” x 2”
Material: ceramic
Weight: 7.65

BBQ'er choice porcelain grill briquets. The finest available.

• Self-Cleaning Porcelain Briquettes.
• Made of fired porcelain for even heat transfer.
• Virtually indestructible.
• About 56 pieces covers approximately 310 square inches.
• Made in USA .

NOTE: MHP model TJK requires two (2) bags.

Part Number: BQ-3A
Weight: 4.2

Cast iron smoker box with six oblong venting holes. Designed to release wood smoke. Make sure this part will fit into your grill before ordering 8 3/8” x 5 1/4” x 1 3/8”.

Part Number: 00150
Dimensions: 5 1/4” x 8 3/8”
Material: cast iron
Weight: 3.90

Ceramic briquettes for Lynx and Dynasty Grills with 28 briquettes per box.

Part Number: BQLYX
Dimensions: 2” x 2”
Material: ceramic
Weight: 4.0

Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.

Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5

Deluxe 13” basting mop with hardwood handle and cotton mop head.

Part Number: 42055
Dimensions: 13
Weight: 0.2

Stainless steel WOK topper with serving handles. Ideal for seafood and vegatables.

Part Number: 96321
Dimensions: 12 3/4” x 12 3/4”
Material: stainless steel
Weight: 1.6

deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.

Part Number: 70255
Dimensions: 18 5/8” x 3 1/2”
Weight: 0.7