Broil King 9982-83NZ

Aftermarket reversible heavy cast iron cooking grid.

• Sold individually
• Number required varies, check your grill
• Porcelain treated, flat matte finish
• Pointed side is designed for perfect sear marks
• Grooved side captures juices for continous basting

Fits: Broil King 500/625/750 series grills.

NOTE: This aftermarket part, made of the same materials as the original, is a perfect replacement for original part# 22005-281 but at a much lower cost.

Part Number: 22005-281-R
Dimension Front-to-Back: 19 1/4”
Dimension Side-to-Side: 6 1/16”
Material: Cast iron
Weight: 5.0

Cast iron cooking grid. Porcelain treated, flat matte finish. Sold individually, number required varies, check your grill.

Part Number: 67845-1PC
Dimension Front-to-Back: 19 3/16”
Dimension Side-to-Side: 6 1/16”
Material: matte cast iron
Weight: 5.5

Cast iron cooking grids, porcelain treated, flat matte finish for Broil King model 9982-83NZ.

Part Number: 67845
Dimension Front-to-Back: 19 3/16”
Dimension Side-to-Side: 30 5/16”
Material: matte cast iron
Weight: 27.2

Genuine OEM Broil King stainless steel Flav-R-Wave heat plate / Vaporizer. The manufacturer has redesigned this Flav-R-Wave. It is still the functional OEM replacement part, and it is sometimes marketed as part number 18433.

Part Number: 22209-904
Dimension Front-to-Back: 17 1/2”
Dimension Side-to-Side: 5 7/8”
Material: Stainless steel
Weight: 1.15

Genuine OEM Broil King electrode with 11” connector wire that has a flat/spade female end; use with AA or AAA battery powered ignitors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

TEMPORARILY OUT OF STOCK, but more are already on the way. Orders for this part will be filled from new inventory expected to arrive early Aug.

Part Number: 10342-E12
Weight: 0.05

Small grease shield used in-between each burner. Four of these replaces one grease shield # 27245-904. Four of these also replaces one grease shield # 22245-901and five of these replaces one grease shield # 27246-904. Refer to your model number and owner's manual. SOLD INDIVIDUALLY

Part Number: 27249-904
Dimensions: 6 1/2” x 6”
Material: stainless steel
Weight: .35

Genuine OEM Broil King Porcelain Grease Pan for Broil King model 9982-83NZ.

Part Number: 22009-901
Dimensions: 6 1/2” x 5 1/8”
Weight: .45

CONTROL KNOB SML I CLEAR for Broil King model 9982-83NZ.

Part Number: 22001-669
Weight: 0.1

BEZEL SS FLAT SML ”250/500/625/750 ”A”” for Broil King model 9982-83NZ.

Part Number: 22001-164
Weight: 0.1

CASTER BRACKET 21 3/4” LONG for Broil King model 9982-83NZ.

Part Number: 21039-911
Weight: 2.05

Rubber castor, 3” w/plate, locking for Broil King model 9982-83NZ.

Part Number: 10892-23
Weight: 0.66

CASTER 3” RUBBER W/LEG LEVEL for Broil King model 9982-83NZ.

Part Number: 10892-285
Weight: 1.0

Genuine OEM Broil King porcelain coated warming rack for Broil King model 9982-83NZ.

Part Number: 22006-991
Dimensions: 32 5/8” x 8 1/2”
Material: porcelain steel
Weight: 6.0

CONTROL ASSEMBLY LP 5V+SB+RB for Broil King model 9982-83NZ.

Part Number: 29006-074
Weight: 1.0

Genuine OEM Broil King Heat indicator. About 2 3/8” wide and 2” high. The threaded stem is about 5 /16” diameter and 1 1/8” long.

Part Number: 10571-6
Weight: 0.12

Cotter pin for Broil King model 9982-83NZ.

Part Number: Y-11230
Weight: 0.01

Hinge pin clip for Broil King model 9982-83NZ.

Part Number: S21233
Weight: 0.01

REAR BURNER SPRING for Broil King model 9982-83NZ.

Part Number: S21362
Weight: 1.0

Washer for Broil King model 9982-83NZ.

Part Number: S21255
Weight: 0.01

LID BUMPER for Broil King model 9982-83NZ.

Part Number: Y-11231
Weight: 0.01

SCREW-PHCP 6-32X1/4 TY-F JS500 for Broil King model 9982-83NZ.

Part Number: Y-12835
Weight: 1.0

Side burner lid IR stainless steel. Sometimes shipped with vinyl peel-off coating; remove before use.

Part Number: 23000-253
Dimensions: 14 1/4” x 11 3/16”
Material: stainless steel
Weight: 1.6

Skewers for part 92339 kebob tray.

Part Number: 11040
Weight: 0.4

Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.

Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5

Marinade Injector.

For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.

Part Number: 14950
Material: stailess steel
Weight: 0.5

Upright porcelain steel roasting rack with grid topper.

Part Number: 40935
Weight: 2.9

EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.

Part Number: 00030
Weight: 0.1