Home > Broil King Grill Models > Broil King 9974-83
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Broil King grill.
Replacement grill parts for Broil King model: 9974-83
9974-83 FLAV-R-WAVE
Genuine OEM Broil King stainless steel Flav-R-Wave
heat plate / Vaporizer. The manufacturer has redesigned this Flav-R-Wave. It is still the functional OEM replacement part, and it is sometimes marketed as part number 18433.
Part Number: 22209-904
Dimension Front-to-Back: 17 1/2”
Dimension Side-to-Side: 5 7/8”
Material: Stainless steel
Weight: 1.15
$21.48
9974-83 Igniter Components
Genuine OEM Broil King front collector box, top & bottom combo. Includes top 22215-014 and bottom 22225-014. This part has been redesigned by the manufacturer and is now a little shorter but still fully functional in the original grills. Fits 4-Burner grills.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 22225-014A
Dimensions: 21 5/8
Material: stainless steel
Weight: 1.2
$28.89
Genuine OEM Broil King electrode with 14 3/8” connector wire that has a spade female end; use with AA or AAA battery powered ignitors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-E13
Weight: 0.05
$3.81
9974-83 Grease Trays
Small grease shield used in-between each burner. Four of these replaces one grease shield # 27245-904. Four of these also replaces one grease shield # 22245-901and five of these replaces one grease shield # 27246-904. Refer to your model number and owner's manual. SOLD INDIVIDUALLY
Part Number: 27249-904
Dimensions: 6 1/2” x 6”
Material: stainless steel
Weight: .35
$7.60
9974-83 Knobs and Handles
CONTROL KNOB SML I CLEAR for Broil King model 9974-83.
Part Number: 22001-669
Weight: 0.1
Image not available
$5.15
BEZEL SS FLAT SML ”250/500/625/750 ”A”” for Broil King model 9974-83.
Part Number: 22001-164
Weight: 0.1
Image not available
$2.83
LID HANDLE-STRAIGHT 500 430SS* for Broil King model 9974-83.
Part Number: 24005-239
Weight: 1.0
Image not available
$13.98
LID HANDLE-STRAIGHT 250 430SS* for Broil King model 9974-83.
Part Number: 24003-239
Weight: 1.0
Image not available
$7.89
HANDLE END CAP CHROME * for Broil King model 9974-83.
Part Number: 26009-917
Weight: 1.0
$25.06
HANDLE WEDGE BLK for Broil King model 9974-83.
Part Number: 24009-938
Weight: 1.0
Image not available
$1.95
HANDLE CABINET 'A' for Broil King model 9974-83.
Part Number: 21171-23
Weight: 1.0
Image not available
$6.58
HANDLE SEAT CABINET 430SS * for Broil King model 9974-83.
Part Number: 21079-906
Weight: 1.0
Image not available
$5.45
9974-83 Warming Racks
Genuine OEM Broil King warming rack.
Porcelain enameled, glossy finish.
Part Number: 22005-991
Dimensions: 26 1/8” x 8 5/8”
Material: Porcelain steel
Weight: 3.10
$49.89
WARMING RACK (SMALLER SIDE) PORCELAIN STEEL for Broil King model 9974-83.
Part Number: 22003-991
Dimensions: 8 5/8” x 12 1/2”
Weight: 1.65
$23.10
9974-83 Heat indicators and Meat Thermometers
Genuine OEM Broil King Heat indicator. About 2 3/8” wide and 2” high. The threaded stem is about 5 /16” diameter and 1 1/8” long.
Part Number: 10571-6
Weight: 0.12
$17.76
9974-83 Miscellaneous Repair Parts
Cotter pin for Broil King model 9974-83.
Part Number: Y-11230
Weight: 0.01
$1.08
Hinge pin clip for Broil King model 9974-83.
Part Number: S21233
Weight: 0.01
$1.08
REAR BURNER SPRING for Broil King model 9974-83.
Part Number: S21362
Weight: 1.0
$1.08
OVEN LIGHT * for Broil King model 9974-83.
Part Number: 25020-71
Weight: 1.0
Image not available
$14.27
9974-83 Hardware
LID BUMPER for Broil King model 9974-83.
Part Number: Y-11231
Weight: 0.01
$1.08
SCREW-PHCP 6-32X1/4 TY-F JS500 for Broil King model 9974-83.
Part Number: Y-12835
Weight: 1.0
Image not available
$0.70
9974-83 Side Burners
Side burner lid IR stainless steel. Sometimes shipped with vinyl peel-off coating; remove before use.
Part Number: 23000-253
Dimensions: 14 1/4” x 11 3/16”
Material: stainless steel
Weight: 1.6
Image not available
$19.15
9974-83 Accessories
Skewers for part 92339 kebob tray.
Part Number: 11040
Weight: 0.4
$4.75
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5
$16.16
Marinade Injector.For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.
Part Number: 14950
Material: stailess steel
Weight: 0.5
$14.41
Stainless steel WOK topper with serving handles. Ideal for seafood and vegatables.
Part Number: 96321
Dimensions: 12 3/4” x 12 3/4”
Material: stainless steel
Weight: 1.6
$22.70
Deluxe venturi brush with 11” coil spring flexible shaft
Part Number: 77310
Weight: 0.3
$9.31
