Home > Broil King Grill Models > Broil King 9960-76CH
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Broil King grill.
Replacement gas grill parts for Broil King model: 9960-76CH
9960-76CH FLAV-R-WAVE
Genuine OEM Broil King stainless steel Flav-R-Wave
heat plate / Vaporizer. The manufacturer has redesigned this Flav-R-Wave. It is still the functional OEM replacement part, and it is sometimes marketed as part number 18433.
Part Number: 22209-904
Dimension Front-to-Back: 17 1/2”
Dimension Side-to-Side: 5 7/8”
Material: Stainless steel
Weight: 1.15
$21.48
9960-76CH Igniter Components
Genuine OEM Broil King electrode with 14 3/8” connector wire that has a spade female end; use with AA or AAA battery powered ignitors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-E13
Weight: 0.05
$3.81
9960-76CH Grease Trays
Small grease shield used in-between each burner. Four of these replaces one grease shield # 27245-904. Four of these also replaces one grease shield # 22245-901and five of these replaces one grease shield # 27246-904. Refer to your model number and owner's manual. SOLD INDIVIDUALLY
Part Number: 27249-904
Dimensions: 6 1/2” x 6”
Material: stainless steel
Weight: .35
$7.60
9960-76CH Knobs and Handles
CONTROL KNOB SML I CLEAR for Broil King model 9960-76CH.
Part Number: 22001-669
Weight: 0.1
Image not available
$5.15
BEZEL SS FLAT SML ”250/500/625/750 ”A”” for Broil King model 9960-76CH.
Part Number: 22001-164
Weight: 0.1
Image not available
$2.83
LID HANDLE-STRAIGHT 500 430SS* for Broil King model 9960-76CH.
Part Number: 24005-239
Weight: 1.0
Image not available
$13.98
HANDLE END CAP CHROME * for Broil King model 9960-76CH.
Part Number: 26009-917
Weight: 1.0
$25.06
HANDLE WEDGE BLK for Broil King model 9960-76CH.
Part Number: 24009-938
Weight: 1.0
Image not available
$1.95
9960-76CH Warming Racks
Genuine OEM Broil King warming rack.
Porcelain enameled, glossy finish.
Part Number: 22005-991
Dimensions: 26 1/8” x 8 5/8”
Material: Porcelain steel
Weight: 3.10
$49.89
9960-76CH Heat indicators and Meat Thermometers
Genuine OEM Broil King Heat indicator. About 2 3/8” wide and 2” high. The threaded stem is about 5 /16” diameter and 1 1/8” long.
Part Number: 10571-6
Weight: 0.12
$17.76
9960-76CH Miscellaneous Repair Parts
Hinge pin clip for Broil King model 9960-76CH.
Part Number: S21233
Weight: 0.01
$1.08
REAR BURNER SPRING for Broil King model 9960-76CH.
Part Number: S21362
Weight: 1.0
$1.08
OVEN LIGHT * for Broil King model 9960-76CH.
Part Number: 25020-71
Weight: 1.0
Image not available
$14.27
9960-76CH Hardware
SCREW-PHCP 6-32X1/4 TY-F JS500 for Broil King model 9960-76CH.
Part Number: Y-12835
Weight: 1.0
Image not available
$0.70
9960-76CH Accessories
Cast iron smoker box with six oblong venting holes. Designed to release wood smoke. Make sure this part will fit into your grill before ordering 8 3/8” x 5 1/4” x 1 3/8”.
Part Number: 00150
Dimensions: 5 1/4” x 8 3/8”
Material: cast iron
Weight: 3.90
$25.40
16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.
Part Number: 40240
Material: chrome steel
Weight: 0.9
$16.59
Deluxe 13” basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Upright porcelain steel roasting rack with grid topper.
Part Number: 40935
Weight: 2.9
$31.80 
$21.99
deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.
Part Number: 70255
Dimensions: 18 5/8” x 3 1/2”
Weight: 0.7
$25.57
USA shipping (contiguous 48 states only)