Broil King 9887-37 (Sovereign XL70)

Genuine OEM Broil King stainless steel Dual-Tube burner. Use air shutter to control flow of air for LP gas, less air, and for natural gas, more air. NOTE: Manufacturer changed back mounting to a 90 degree bend.

Part Number: 10390-E20
Dimensions: 14 3/8” x 1 1/4”
Material: Stainless steel
Weight: 0.75

Genuine OEM Broil King stainless steel rotisserie burner for Broil King model 9887-37.

Part Number: S13016
Dimensions: 34”
Material: Stainless steel
Weight: 1.4

Genuine OEM Broil King stainless steel rotisserie burner assembly.

Includes:
• SS rotisserie burner with deflector (part# S13016)
• burner-mounted electrode, gas collector box, and wire
• Completely assembled

Part Number: S13016A
Weight: 1.0

Genuine OEM Broil King stainless steel Flav-R-Wave for Broil King model 9887-37.

Part Number: 10222-E400
Dimension Front-to-Back: 13 3/4”
Dimension Side-to-Side: 6 1/4”
Material: Stainless steel
Weight: 1.25

Genuine OEM Broil King electronic push-button 2-spade igniter.

• Uses AAA battery (not included)
• .Requires 3/4” mounting hole
• Also replaces part# 10342-242 and 10342-249

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-245
Weight: 0.3

Genuine OEM Broil King electrode with 14 3/8” connector wire that has a spade female end; use with AA or AAA battery powered ignitors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-E13
Weight: 0.05

Genuine OEM Broil King disposable grease pans. Package of 10. Each measures 4.75”x6”x1”.

Part Number: S15115
Dimensions: 4 3/4” x 6”
Material: aluminum
Weight: 0.25

CONTROL KNOB - BEZEL BLK for Broil King model 9887-37.

Part Number: 10472-E38
Weight: 0.1

HANDLE W/STRAP SOVEREIGN XL -- 600 for Broil King model 9887-37.

Part Number: 10184-E713A
Weight: 1.0

24” LP hose and regulator with QCC-1 connection.

• For use on ”new style” QCC-1 tanks.
• Consists of hose part# 01000 and regulator part# 00920.
• Hose end with SAE 3/8” female flare fitting connects to grill.

Note: The grill must have a matching SAE 3/8” male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 3/8” fitting is much larger, approximately 5/8”. See our flare fitting description for information on measuring and sizes.

Part Number: 80012
Dimensions: 23 1/2” x 0 1/2”
Weight: 0.80

Genuine OEM Broil King NG gas hose for Broil King model 9887-37.

Part Number: 10111-K45
Weight: 2.1

Genuine OEM Broil King 8” cart wheel with a 3/8” axel hole. Also replaces part# 10892-8, and 10892-8N which have been discontinued. Is a solid rubber wheel with a plastic hub, and it has a grey sidewall stripe instead of the white found on 10892-8N.

Part Number: 10892-8NG
Dimensions: 8
Weight: 1.6

ROTISSERIE SHIELD BRACKET FOR RIGHT SIDE WITH TWO MOUNTING HOLES for Broil King model 9887-37.

Part Number: 10184-E43
Weight: .20

ROTISSERIE MOTOR BRACKET for Broil King model 9887-37.

Part Number: 10184-E42
Weight: .25

ROTISSERIE SHIELD BRACKET FOR LEFT SIDE WITH ONE MOUTNING HOLE for Broil King model 9887-37.
TEMPORARILY OUT OF STOCK, but more are already on the way. Orders for this part will be filled from new inventory expected to arrive early Aug.

Part Number: 10184-E44
Weight: .20

Genuine OEM Broil King Heat indicator. About 2 3/8” wide and 2” high. The threaded stem is about 5 /16” diameter and 1 1/8” long.

Part Number: 10571-6
Weight: 0.12

Hinge pin clip for Broil King model 9887-37.

Part Number: S21233
Weight: 0.01

ALIGNMENT, BRACKET BLACK for Broil King model 9887-37.

Part Number: 10184-E691
Weight: 1.0

REAR BURNER SPRING for Broil King model 9887-37.

Part Number: S21362
Weight: 1.0

Push nut 3/8 for Broil King model 9887-37.

Part Number: S21420
Weight: 0.1

Washer for Broil King model 9887-37.

Part Number: S21255
Weight: 0.01

END CAP SIDE SHELF RHS for Broil King model 9887-37.

Part Number: 10711-E47
Weight: 1.0

shishkebob skewers

Part Number: 46074
Dimensions: 18” x 0 5/8”
Material: stainless steel
Weight: 0.4

20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.

Part Number: 40269
Material: stainless steel
Weight: 0.14

Deluxe 13” basting mop with hardwood handle and cotton mop head.

Part Number: 42055
Dimensions: 13
Weight: 0.2

Stainless steel chicken roaster. Commonly called Beer Can roasters.

• The best way to roast poultry on the grill
• For use in barbecues and ovens
• Dishwasher safe
• Includes rack, rack support, and basting brush

Part Number: 41333
Material: stainless steel
Weight: 0.10

deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.

Part Number: 70255
Dimensions: 18 5/8” x 3 1/2”
Weight: 0.7