Home > Broil King Grill Models > Broil King 982563
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Broil King grill.
Replacement grill parts for the Broil King 982563
982563 Burners
Genuine OEM Broil King Side Burner. Use air shutter to adjust for LP (less air flow) or natural gas (more air flow).
Part Number: 10390-E10
Weight: 0.4
$14.96
982563 FLAV-R-WAVE
Genuine OEM Broil King stainless steel Flav-R-Wave for Broil King model 982563.
Part Number: 52209-404
Dimension Front-to-Back: 15 7/8”
Dimension Side-to-Side: 6”
Material: stainless steel
Weight: 1.14
$21.93
982563 Igniter Components
Genuine stainless steel two piece collector box assembly. Consists of both upper and lower pieces.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 52225-014A
Dimensions: 23
Material: stainless steel
Weight: 1.0
$28.25
Genuine OEM Broil King electronic push-button 3-spade igniter.
- Uses AAA battery (not included)
- .Requires 3/4” mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-246
Weight: 0.6
$18.48
Genuine OEM Broil King electrode with 11” connector wire that has a flat/spade female end; use with AA or AAA battery powered ignitors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
TEMPORARILY OUT OF STOCK, but more are already on the way. Orders for this part will be filled from new inventory expected to arrive early Aug.
Part Number: 10342-E12
Weight: 0.05
$3.70
982563 Grease Trays
Small grease shield used in-between each burner. Four of these replaces one grease shield # 27245-904. Four of these also replaces one grease shield # 22245-901and five of these replaces one grease shield # 27246-904. Refer to your model number and owner's manual. SOLD INDIVIDUALLY
Part Number: 27249-904
Dimensions: 6 1/2” x 6”
Material: stainless steel
Weight: .35
$7.60
Grease tray 440; porcelain flatte matte finish for Broil King model 982563.
Part Number: 57055-901
Dimensions: 6 3/4” x 25 7/16”
Material: porcelain steel
Weight: 1.25
$27.24
GREASE PAN - 330/440/550 for Broil King model 982563.
Part Number: 52009-901
Dimensions: 5 1/8” x 6 1/2”
Weight: .40
$15.11
Genuine OEM Broil King Porcelain Grease Pan for Broil King model 982563.
Part Number: 22009-901
Dimensions: 6 1/2” x 5 1/8”
Weight: .45
$15.11
982563 Knobs and Handles
LID-HANDLE BENT 500 430 SS. NOTE: The mounting holes, center to center, are 23 1/2” apart.
Part Number: 24005-12A
Dimensions: 25
Weight: .85
$25.86
CONTROL KNOB RESIN LRG BLACK -- W/SS BA STRIP for Broil King model 982563.
Part Number: 10472-K431
Weight: 0.1
$5.15
CONTROL KNOB SMALL W/BA STRIP.
- Off position D-Value: 6 o'clock
- Knob diameter: 1 7/8”
- Socket diameter: 5/16”
- Knob shaft: 1/2”
Part Number: 10472-K231
Weight: 0.1
$5.15
982563 Warming Racks
WARMING RACK 440 PORC (back support rod 25 5/8” and front support rod 26 3/16” warming rack 7 3/8” x 25”) for Broil King model 982563.
Part Number: 52005-991
Dimensions: 25 5/8
Weight: 3.3
$35.16
982563 Heat indicators and Meat Thermometers
Genuine OEM Broil King Heat indicator. About 2 3/8” wide and 2” high. The threaded stem is about 5 /16” diameter and 1 1/8” long.
Part Number: 10571-6
Weight: 0.12
$17.76
982563 Miscellaneous Repair Parts
Cotter pin for Broil King model 982563.
Part Number: Y-11230
Weight: 0.01
$1.08
Hinge pin clip for Broil King model 982563.
Part Number: S21233
Weight: 0.01
$1.08
982563 Hardware
SCREW-PHCP 6-32X1/4 TY-F JS500 for Broil King model 982563.
Part Number: Y-12835
Weight: 1.0
Image not available
$0.70
LID BUMPER for Broil King model 982563.
Part Number: Y-11231
Weight: 0.01
$1.08
982563 Accessories
Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10” x 13 3/4”.
Part Number: 41338
Weight: 1.1
$22.60
15” Stainless steel tong.
- Soft comfort grip
- Locking mechanism
Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14
$9.92
Marinade Injector.For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.
Part Number: 14950
Material: stailess steel
Weight: 0.5
$14.41
Aluminum foil grilling trays. Package of three.
- Heavy duty aluminum foil
- Re-usable
- Great for grilling delicate foods like fish and veggies
Part Number: 50426
Dimensions: 9” x 13”
Weight: 0.4
$8.64
EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.
Part Number: 00030
Weight: 0.1
$7.60