Home > Broil King Grill Models > Broil King 9567-83NZ
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Broil King grill.
Replacement grill parts to fit Broil King model: 9567-83NZ
9567-83NZ FLAV-R-WAVE
Genuine OEM Broil King stainless steel Flav-R-Wave
heat plate / Vaporizer. The manufacturer has redesigned this Flav-R-Wave. It is still the functional OEM replacement part, and it is sometimes marketed as part number 18433.
Part Number: 22209-904
Dimension Front-to-Back: 17 1/2”
Dimension Side-to-Side: 5 7/8”
Material: Stainless steel
Weight: 1.15
$21.48
9567-83NZ Igniter Components
Genuine OEM Broil King electrode with 14 3/8” connector wire that has a spade female end; use with AA or AAA battery powered ignitors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-E13
Weight: 0.05
$3.81
9567-83NZ Grease Trays
Small grease shield used in-between each burner. Four of these replaces one grease shield # 27245-904. Four of these also replaces one grease shield # 22245-901and five of these replaces one grease shield # 27246-904. Refer to your model number and owner's manual. SOLD INDIVIDUALLY
Part Number: 27249-904
Dimensions: 6 1/2” x 6”
Material: stainless steel
Weight: .35
$7.60
Genuine OEM Broil King Porcelain Grease Pan for Broil King model 9567-83NZ.
Part Number: 22009-901
Dimensions: 6 1/2” x 5 1/8”
Weight: .45
$15.11
9567-83NZ Knobs and Handles
CONTROL KNOB SML I CLEAR for Broil King model 9567-83NZ.
Part Number: 22001-669
Weight: 0.1
Image not available
$5.15
BEZEL SS FLAT SML ”250/500/625/750 ”A”” for Broil King model 9567-83NZ.
Part Number: 22001-164
Weight: 0.1
Image not available
$2.83
LID HANDLE-STRAIGHT 500 430SS* for Broil King model 9567-83NZ.
Part Number: 24005-239
Weight: 1.0
Image not available
$13.98
HANDLE END CAP CHROME * for Broil King model 9567-83NZ.
Part Number: 26009-917
Weight: 1.0
$25.06
HANDLE WEDGE BLK for Broil King model 9567-83NZ.
Part Number: 24009-938
Weight: 1.0
Image not available
$1.95
HANDLE SEAT CABINET 430SS * for Broil King model 9567-83NZ.
Part Number: 21079-906
Weight: 1.0
Image not available
$5.45
HANDLE CABINET 'A' for Broil King model 9567-83NZ.
Part Number: 21171-23
Weight: 1.0
Image not available
$6.58
9567-83NZ Wheels and Castors
CASTER BRACKET 21 3/4” LONG for Broil King model 9567-83NZ.
Part Number: 21039-911
Weight: 2.05
Image not available
$18.50
Rubber castor, 3” w/plate, locking for Broil King model 9567-83NZ.
Part Number: 10892-23
Weight: 0.66
$8.76
CASTER 3” RUBBER W/LEG LEVEL for Broil King model 9567-83NZ.
Part Number: 10892-285
Weight: 1.0
$13.77
9567-83NZ Warming Racks
Genuine OEM Broil King warming rack.
Porcelain enameled, glossy finish.
Part Number: 22005-991
Dimensions: 26 1/8” x 8 5/8”
Material: Porcelain steel
Weight: 3.10
$49.89
9567-83NZ Valves, Orifices, and Manifolds
CONTROL ASSEMBLY LP 6V for Broil King model 9567-83NZ.
Part Number: 29005-074
Weight: 1.0
Image not available
$115.29
9567-83NZ Heat indicators and Meat Thermometers
Genuine OEM Broil King Heat indicator. About 2 3/8” wide and 2” high. The threaded stem is about 5 /16” diameter and 1 1/8” long.
Part Number: 10571-6
Weight: 0.12
$17.76
9567-83NZ Miscellaneous Repair Parts
Cotter pin for Broil King model 9567-83NZ.
Part Number: Y-11230
Weight: 0.01
$1.08
Hinge pin clip for Broil King model 9567-83NZ.
Part Number: S21233
Weight: 0.01
$1.08
REAR BURNER SPRING for Broil King model 9567-83NZ.
Part Number: S21362
Weight: 1.0
$1.08
Washer for Broil King model 9567-83NZ.
Part Number: S21255
Weight: 0.01
$1.08
OVEN LIGHT * for Broil King model 9567-83NZ.
Part Number: 25020-71
Weight: 1.0
Image not available
$14.27
9567-83NZ Hardware
LID BUMPER for Broil King model 9567-83NZ.
Part Number: Y-11231
Weight: 0.01
$1.08
SCREW-PHCP 6-32X1/4 TY-F JS500 for Broil King model 9567-83NZ.
Part Number: Y-12835
Weight: 1.0
Image not available
$0.70
9567-83NZ Side Burners
Side burner lid IR stainless steel. Sometimes shipped with vinyl peel-off coating; remove before use.
Part Number: 23000-253
Dimensions: 14 1/4” x 11 3/16”
Material: stainless steel
Weight: 1.6
Image not available
$19.15
9567-83NZ Accessories
shishkebob skewers
Part Number: 46074
Dimensions: 18” x 0 5/8”
Material: stainless steel
Weight: 0.4
$7.65
Deluxe 17” stainless steel turner.
- Soft comfort rubber grip
- Stainless steel blade
Part Number: 43108
Material: stainless steel
Weight: 0.10
$9.48
Deluxe 13” basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Aluminum foil grilling trays. Package of three.
- Heavy duty aluminum foil
- Re-usable
- Great for grilling delicate foods like fish and veggies
Part Number: 50426
Dimensions: 9” x 13”
Weight: 0.4
$8.64
deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.
Part Number: 70255
Dimensions: 18 5/8” x 3 1/2”
Weight: 0.7
$25.57
