Broil King 9565-24 (Regal 440 Pro)

Genuine OEM Broil King stainless steel Dual-Tube burner. This part has been slightly changed by the manufacturer to include a small bend at the end that does not affect the fit on existing grills that use this part.

Note: The adjustable air shutter on this burner should be set to 1/3 open for LP grills, 2/3 open for natural gas grills. The burner ships with the air shutter set 1/3 open for LP grills.

This burner is the same part as 22909-104NG and 22909-104LP. There is no difference in the parts, 22909-104NG has the air shutter set to 2/3 open for natural gas, 22909-104LP has the air shutter set to 1/3 open for LP.

Part Number: 22909-104
Dimensions: 17 1/8” x 1 1/4”
Material: Stainless steel
Weight: 1.0

Replacement for 22022-284. Premium stainless steel cooking grid with 5/16” rods. Is called ”double wide” because some owner's manuals' diagrams show with 4 ”small” panels, but the Parts List shows only two panels required. (DBL WIDE 500/625/750). Also replaces OEM 22022-184; same issue concerning owner's manuals.
Made in USA

Part Number: 22022-284-R
Dimension Front-to-Back: 19 1/4”
Dimension Side-to-Side: 12 1/2”
Material: stainless steel
Weight: 8.0

Genuine OEM Broil King stainless steel Flav-R-Wave heat plate / Vaporizer. The manufacturer has redesigned this Flav-R-Wave. It is still the functional OEM replacement part, and it is sometimes marketed as part number 18433.

Part Number: 22209-904
Dimension Front-to-Back: 17 1/2”
Dimension Side-to-Side: 5 7/8”
Material: Stainless steel
Weight: 1.15

Genuine OEM Broil King front collector box, top & bottom combo. Includes top 22215-014 and bottom 22225-014. This part has been redesigned by the manufacturer and is now a little shorter but still fully functional in the original grills. Fits 4-Burner grills.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 22225-014A
Dimensions: 21 5/8
Material: stainless steel
Weight: 1.2

Genuine OEM Broil King 32” wire for side burner and other applications. Both ends are female spade connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-T18
Dimensions: 32
Weight: 0.05

Genuine OEM Broil King electrode with 11” connector wire that has a flat/spade female end; use with AA or AAA battery powered ignitors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

TEMPORARILY OUT OF STOCK, but more are already on the way. Orders for this part will be filled from new inventory expected to arrive early Aug.

Part Number: 10342-E12
Weight: 0.05

Genuine OEM Broil King electronic push-button 3-spade igniter.

• Uses AAA battery (not included)
• .Requires 3/4” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-246
Weight: 0.6

Small grease shield used in-between each burner. Four of these replaces one grease shield # 27245-904. Four of these also replaces one grease shield # 22245-901and five of these replaces one grease shield # 27246-904. Refer to your model number and owner's manual. SOLD INDIVIDUALLY

Part Number: 27249-904
Dimensions: 6 1/2” x 6”
Material: stainless steel
Weight: .35

Genuine OEM Broil King Porcelain Grease Pan for Broil King model 9565-24.

Part Number: 22009-901
Dimensions: 6 1/2” x 5 1/8”
Weight: .45

Genuine OEM Broil King small control knob.

• Off position D-Value: 6 o'clock
• Knob diameter: 1 7/8”
• Socket diameter: 5/16”
• Knob shaft: 1/2”

Part Number: 22001-668
Weight: 0.1

BEZEL SS FLAT SML ”250/500/625/750 ”A”” for Broil King model 9565-24.

Part Number: 22001-164
Weight: 0.1

LID-HANDLE BENT 500 430 SS. NOTE: The mounting holes, center to center, are 23 1/2” apart.

Part Number: 24005-12A
Dimensions: 25
Weight: .85

CASTER BRACKET 21 3/4” LONG for Broil King model 9565-24.

Part Number: 21039-911
Weight: 2.05

Rubber castor, 3” w/plate, locking for Broil King model 9565-24.

Part Number: 10892-23
Weight: 0.66

CASTER 3” RUBBER W/LEG LEVEL for Broil King model 9565-24.

Part Number: 10892-285
Weight: 1.0

Genuine OEM Broil King Heat indicator. About 2 3/8” wide and 2” high. The threaded stem is about 5 /16” diameter and 1 1/8” long.

Part Number: 10571-6
Weight: 0.12

Cotter pin for Broil King model 9565-24.

Part Number: Y-11230
Weight: 0.01

SHELF STRAP BLK RESIN for Broil King model 9565-24.

Part Number: 23009-608
Weight: 1.0

Hinge pin clip for Broil King model 9565-24.

Part Number: S21233
Weight: 0.01

Washer for Broil King model 9565-24.

Part Number: S21255
Weight: 0.01

LID BUMPER for Broil King model 9565-24.

Part Number: Y-11231
Weight: 0.01

SCREW-PHCP 6-32X1/4 TY-F JS500 for Broil King model 9565-24.

Part Number: Y-12835
Weight: 1.0

TANK BASE I/R BLACK for Broil King model 9565-24.

Part Number: 21526-371
Weight: 1.0

Side burner lid IR stainless steel. Sometimes shipped with vinyl peel-off coating; remove before use.

Part Number: 23000-253
Dimensions: 14 1/4” x 11 3/16”
Material: stainless steel
Weight: 1.6

Texas hickory flavor wood chips. 800g.

Part Number: 00220
Weight: 2.0

16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.

Part Number: 40240
Material: chrome steel
Weight: 0.9

economy basting brushes. Two brushes, 7.5” long.

Part Number: 43054
Weight: 0.1

Upright porcelain steel roasting rack with grid topper.

Part Number: 40935
Weight: 2.9

Abrasive scrubbing brush. Ideal for cleaning porcelain grills.

Part Number: 71448
Weight: 0.2