Brinkmann 810-7741-0 (Pro Series 7741)

Adjustable universal front-to-back tube burner with top-ported flame holes. This burner may not work with existing ignition electrodes and back burner cross-overs.

• Variable length burner adjusts from 13 1/2” to 17 1/2”.
• Includes extra hardware and mounting brackets to accommodate almost all grills.
• Comes with complete installation instructions and diagrams.

WARNING: Before ordering this universal burner, please verify that it will work in your grill per the specifications above. If you order this universal burner and it does not work in your grill, please review our Return Policy for ”Ordered Wrong Part.” You will be responsible for all shipping fees.

Part Number: FP-BR1001
Material: stainless steel
Weight: 0.7

Stainless steel burner for Brinkmann model 810-7741-0.

Part Number: 14061
Dimensions: 16 3/16” x 1”
Material: stainless steel
Weight: 0.7

Premium quality stainless steel tube burner. Sold individually, number required varies by grill.

Replaces Brinkmann factory part# 154-7741-0

Part Number: CLA-BS0200
Dimensions: 15 3/4” x 1”
Material: stainless steel
Weight: 0.3

Cast iron cooking grids (set of 3). Porcelain enameled, glossy finish.

Part Number: 67413
Dimension Front-to-Back: 19”
Dimension Side-to-Side: 29 3/16”
Material: gloss cast iron
Weight: 13.7

Stainless steel aftermarket Heat Distribution Plate / Flame Tamer.

• Stainless equivalent of part 97741
• Superior to the porcelain steel originals
• Rust and corrosion restitant
• Sold individually
• Made in USA

Part Number: 97741-SS
Dimension Front-to-Back: 17 7/8”
Dimension Side-to-Side: 3 15/16”
Material: stainless steel
Weight: 1.0

Porcelain steel Heat Distribution Plate. Sold individually.

Replaces Brinkmann factory part# 600-7741-0

Part Number: 97741
Dimension Front-to-Back: 17 7/8”
Dimension Side-to-Side: 3 15/16”
Material: porcelain steel
Weight: 1.0

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

• Wire has female spade connector on one end and square plastic connector on the other
• Square plastice connector attaches to spark generator
• Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 03610
Weight: 0.05

14” ground wire with female spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03620
Weight: 0.1

Universal battery powered push button ignitor.

• 1.5 volt
• Has six (6) terminals (male spade connector)
• Uses a single AA battery (not included))
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole
• Overall dimensions: 2” x 3 3/8” x 3”
• Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Brinkmann factory part# 119-7741-0

Part Number: 03350
Weight: 0.7

Oval lid heat indicator. Mounts to grill with single 1.25” long threaded temperature probe in center.

Replaces Brinkmann factory part# 072-7231-0

Part Number: 072-6800-0
Dimensions: 2 15/16” x 1 7/8”
Material: stainless steel
Weight: 0.2

shishkebob skewers

Part Number: 46074
Dimensions: 18” x 0 5/8”
Material: stainless steel
Weight: 0.4

20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.

Part Number: 40269
Material: stainless steel
Weight: 0.14

Deluxe 13” basting mop with hardwood handle and cotton mop head.

Part Number: 42055
Dimensions: 13
Weight: 0.2

Stainless steel WOK topper with serving handles. Ideal for seafood and vegatables.

Part Number: 96321
Dimensions: 12 3/4” x 12 3/4”
Material: stainless steel
Weight: 1.6

deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.

Part Number: 70255
Dimensions: 18 5/8” x 3 1/2”
Weight: 0.7