Brinkmann 810-6631-F

Stainless steel sear burner with attached electrode tab. This is a rather unique burner. It has a tube attached to one inner side of the burner that has flame ports and the end is plugged; it does not attach to the other side. This burner does not exactly resemble the original burner OEM # 154-3660-0 for some Brinkmann models, however it is a very good replacement burner.

Part Number: 13461
Dimensions: 15 3/8” x 4 3/8”
Material: stainless steel
Weight: 0.7

Stainless steel burner for Brinkmann model 810-6631-F.

Part Number: 19511
Dimensions: 15 3/8” x 1”
Material: stainless steel
Weight: 0.7

Stainless steel burner cross-over tube for Brinkmann model 810-6631-F.

Part Number: 09423
Dimensions: 7 5/8” x 2 3/8”
Material: stainless steel
Weight: 0.2

Cast iron cooking grids. SET OF FOUR (4).

• Porcelain treated, matte finish
• 4 panels, each 17 5/8” x 8 3/4”
• Total width: 35”

Part Number: CG-73P-CI-X4
Dimension Front-to-Back: 17 5/8”
Dimension Side-to-Side: 35”
Material: cast iron
Weight: 22.20

Cast iron cooking grids (set of 4). Porcelain treated, flat matte finish.

Part Number: 64104
Dimension Front-to-Back: 17 5/8”
Dimension Side-to-Side: 35 1/2”
Material: cast iron
Weight: 14.1

Stainless steel Heat Distribution Plate for Sear Burner. Sold individually.

Part Number: 93661
Dimension Front-to-Back: 15 5/16”
Dimension Side-to-Side: 5 1/8”
Material: stainless steel
Weight: 0.8

Porcelain steel Heat Distribution Plate. Sold individually.

Part Number: 99491
Dimension Front-to-Back: 15 1/8”
Dimension Side-to-Side: 3 3/4”
Material: porcelain steel
Weight: 0.7

36” wire with two female spade connectors for side burner igniters (not for use with rotary or piezo ignitors).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03500
Weight: 0.05

Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

• Wire has female spade connector on one end and square plastic connector on the other
• Square plastice connector attaches to spark generator
• Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 03610
Weight: 0.05

Burner mounted electrode with male spade connector. Includes small mounting bolt and nut.

• Wire not included. Commonly used with wire part# 03610.
• Female spade connector on wire connects to male spade connector of electrode.
• If used with existing wire, confirm connecting end of wire is a female spade connector
• Usually, one electrode required per burner

NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Also available in more economical 2, 3, 4, and 5 piece multi-packs. See part 04022-X2, X3, X4, and X5.

Part Number: 04022
Material: ceramic
Weight: 0.1

heat indicator for Brinkmann model 810-6631-F.

Part Number: 00013
Dimensions: 3 3/8” x 2 1/16”
Weight: 0.2

HOW TO GRILL The Complete Illustrated Book of Barbecue Techniques. Steve Raichlen presents a full-color, step-by-step technique book that gets to the core of the grilling experience by showing and telling exactly how it's done. With more than 1,000 photographs, if features over 100 techniques and recipes, from how to set up a three-zone fire to how to grill a perfect prime rib, to grilling pizza, shellfish, vegetables, tofu, fruit, and s'mores.

Part Number: 0-7611-2014-9
Dimensions: 8” x 9 1/4”
Material: Paperback
Weight: 3.0

Deluxe 17” stainless steel turner.

• Soft comfort rubber grip
• Stainless steel blade

Part Number: 43108
Material: stainless steel
Weight: 0.10

Marinade Injector.

For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.

Part Number: 14950
Material: stailess steel
Weight: 0.5

Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.

• Ideal for cooking pieces of meat or vegetables
• Self basting, easy to use
• Locks on spit rod with thumb screw (supplied)
• 6 1/2” x 10” long

Part Number: 24764
Dimensions: 6 1/2” x 10”
Weight: 1.1

Deluxe venturi brush with 11” coil spring flexible shaft

Part Number: 77310
Weight: 0.3