Brinkmann 810-3660-S

Stainless steel sear burner with attached electrode tab. This is a rather unique burner. It has a tube attached to one inner side of the burner that has flame ports and the end is plugged; it does not attach to the other side. This burner does not exactly resemble the original burner OEM # 154-3660-0 for some Brinkmann models, however it is a very good replacement burner.

Part Number: 13461
Dimensions: 15 3/8” x 4 3/8”
Material: stainless steel
Weight: 0.7

Stainless steel burner for Brinkmann model 810-3660-S.

Part Number: 19511
Dimensions: 15 3/8” x 1”
Material: stainless steel
Weight: 0.7

Stainless steel burner cross-over tube for Brinkmann model 810-3660-S.

Part Number: 09423
Dimensions: 7 5/8” x 2 3/8”
Material: stainless steel
Weight: 0.2

Cast iron cooking grids. SET OF FOUR (4).

• Porcelain treated, matte finish
• 4 panels, each 17 5/8” x 8 3/4”
• Total width: 35”

Part Number: CG-73P-CI-X4
Dimension Front-to-Back: 17 5/8”
Dimension Side-to-Side: 35”
Material: cast iron
Weight: 22.20

Cast iron cooking grids (set of 4). Porcelain treated, flat matte finish.

Part Number: 64104
Dimension Front-to-Back: 17 5/8”
Dimension Side-to-Side: 35 1/2”
Material: cast iron
Weight: 14.1

SET OF FOUR/4 PACK Stainless steel Heat Distribution Plates. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0135-X4
Dimension Front-to-Back: 15 5/16”
Dimension Side-to-Side: 3 7/8”
Material: stainless steel
Weight: 2.64

Stainless steel Heat Distribution Plate. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0135
Dimension Front-to-Back: 15 5/16”
Dimension Side-to-Side: 3 7/8”
Material: stainless steel
Weight: 0.66

Stainless steel Heat Distribution Plate for Sear Burner. Sold individually.

Part Number: 93661
Dimension Front-to-Back: 15 5/16”
Dimension Side-to-Side: 5 1/8”
Material: stainless steel
Weight: 0.8

Porcelain steel Heat Distribution Plate. Sold individually.

Part Number: 92311
Dimension Front-to-Back: 15 3/8”
Dimension Side-to-Side: 3 15/16”
Material: porcelain steel
Weight: 0.63

Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

• Wire has female spade connector on one end and square plastic connector on the other
• Square plastice connector attaches to spark generator
• Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 03610
Weight: 0.05

Burner mounted electrode with male spade connector. Includes small mounting bolt and nut.

• Wire not included. Commonly used with wire part# 03610.
• Female spade connector on wire connects to male spade connector of electrode.
• If used with existing wire, confirm connecting end of wire is a female spade connector
• Usually, one electrode required per burner

NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Also available in more economical 2, 3, 4, and 5 piece multi-packs. See part 04022-X2, X3, X4, and X5.

Part Number: 04022
Material: ceramic
Weight: 0.1

Round 2 3/8” diameter heat indicator, includes one wing nut and one locking nut.

• Requires minimum 3/8” mounting hole
• Single 1 3/8” probe
• Threaded portion of probe stops at 1/2” from base
• See photo for details

Part Number: 00012
Dimensions: 2 3/8” x 2 3/8”
Weight: 0.1

Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10” x 13 3/4”.

Part Number: 41338
Weight: 1.1

15” Stainless steel tong.

• Soft comfort grip
• Locking mechanism

Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14

Marinade Injector.

For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.

Part Number: 14950
Material: stailess steel
Weight: 0.5

Stainless steel chicken roaster. Commonly called Beer Can roasters.

• The best way to roast poultry on the grill
• For use in barbecues and ovens
• Dishwasher safe
• Includes rack, rack support, and basting brush

Part Number: 41333
Material: stainless steel
Weight: 0.10

Deluxe venturi brush with 11” coil spring flexible shaft

Part Number: 77310
Weight: 0.3