Home > Brinkmann Grill Models > Brinkmann 810-2700-0Brinkmann Pro Series 2700 Stainless Steel 6 Burner Gas Grill
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Brinkmann grill.
Part diagrams and owners manuals for Brinkmann model: 810-2700-0 (Pro Series 2700)
Click small image to enlarge. Click Large image to reduce.
Double click for new window |
| |
Replacement BBQ grill parts for Brinkmann model: 810-2700-0 (Pro Series 2700)
810-2700-0 (Pro Series 2700) Burners
154-2500-0-R-X6 Cast iron burners. Set of six (6). Fits some Brinkman and Grill Zone 6-Burner gas grills. May fit other grill models. This aftermarket burner replaces original burner part# 154-2500-0.
This a 6-pack of burners.
Part Number: 154-2500-0-R-X6
Dimensions: 12 7/8” x 2 1/8”
Material: cast iron
Weight: 13.2
$152.94 
$143.28
154-2500-0-R Cast iron burner for some Brinkmann and Grill Zone 3, 4, and 6 burner grills. Sold individually.
This aftermarket part replaces original Brinkmann part# 154-2500-0.
Part Number: 154-2500-0-R
Dimensions: 12 7/8” x 2 1/8”
Material: cast iron
Weight: 2.2
$25.49 $24.94
810-2700-0 (Pro Series 2700) Cooking Grids
Cast iron
cooking grid.
Porcelain treated, flat matte finish. Sold individually, number required varies.
Replaces Brinkmann factory part# 115-2701-0
Part Number: 60663-1PC
Dimension Front-to-Back: 16 15/16”
Dimension Side-to-Side: 11 3/4”
Material: cast iron
Weight: 6.7
$49.38
810-2700-0 (Pro Series 2700) Heat Tents
Porcelain steel heat tent. Single piece.
Replaces Brinkmann factory part# 600-2709-0
Part Number: 90262-1PC
Dimension Front-to-Back: 15 1/16”
Dimension Side-to-Side: 11 3/4”
Material: porcelain steel
Weight: 3.5
$41.50 $29.99
810-2700-0 (Pro Series 2700) Igniter Components
Push-button electronic igniter with four (4)
spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4” mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: TS-IG4010
Weight: 0.2
$18.48
46” Wire with female
spade connectors and square plastic connectors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-30B
Dimensions: 46
Weight: 0.1
$7.10
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
$9.07
14” ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
$6.55
810-2700-0 (Pro Series 2700) Knobs and Handles
Black control knob.
- Off position D-Value: 12 o'clock
- Knob diameter: 2 3/16”
- Socket diameter: 8mm (tight fit)
- Knob shaft: 3/16”
Replaces Brinkmann factory part# 113-2500-J
Part Number: 02500
Dimensions: 2 3/16” x 2 3/16”
Material: plastic
Weight: 0.2
$8.41
810-2700-0 (Pro Series 2700) Heat indicators and Meat Thermometers
heat indicator for Brinkmann model 810-2700-0.
Replaces Brinkmann factory part# 072-2500-0
Part Number: 02351
Dimensions: 2 5/8” x 2 5/8”
Weight: 0.2
$14.85
810-2700-0 (Pro Series 2700) Accessories
Skewers for part 92339 kebob tray.
Part Number: 11040
Weight: 0.4
$4.75
16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.
Part Number: 40240
Material: chrome steel
Weight: 0.9
$16.59
Marinade Injector.For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.
Part Number: 14950
Material: stailess steel
Weight: 0.5
$14.41
Stainless steel chicken roaster. Commonly called Beer Can roasters.
- The best way to roast poultry on the grill
- For use in barbecues and ovens
- Dishwasher safe
- Includes rack, rack support, and basting brush
Part Number: 41333
Material: stainless steel
Weight: 0.10
$19.84
EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.
Part Number: 00030
Weight: 0.1
$7.60
