Brinkmann 810-2310-1 (Pro Series 2310) | Parts

Home > Brinkmann Grill Models > Brinkmann 810-2310-1

Brinkmann Pro Series 2310 - 3 Burner Heavy-Duty Gas Grill

Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Brinkmann grill.

Part diagrams and owners manuals for Brinkmann model: 810-2310-1 (Pro Series 2310)

Click small image to enlarge. Click Large image to reduce.
Double click for new window

Grill image for model: 810-2310-1 (Pro Series 2310)

Exploded parts diagram for model: 810-2310-1 (Pro Series 2310)

Replacement gas grill parts for Brinkmann model: 810-2310-1 (Pro Series 2310)

810-2310-1 (Pro Series 2310) Burners

Cast iron burner for Brinkmann model 810-2310-1.

Replaces Brinkmann factory part# 154-2300-5

Part Number: 22401
Dimensions: 16 1/4” x 2 3/8”
Material: cast iron
Weight: 3.1

cast iron burner for Brinkmann model 810-2310-1

$36.06

All Brinkmann Burners

810-2310-1 (Pro Series 2310) Cooking Grills

Cast iron cooking grill. Porcelain treated, flat matte finish. Sold individually, number required varies.

Replaces Brinkmann factory part# 115-2300-0

Part Number: 66662-1PC
Dimension Front-to-Back: 19”
Dimension Side-to-Side: 12 1/2”
Material: matte cast iron
Weight: 11.25

$59.06

All Brinkmann Cooking Grills

810-2310-1 (Pro Series 2310) Heat Distribution Plates

SET OF THREE/3 PACK Stainless steel Heat Distribution Plates/Flame Tamers. Made in USA

.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.e.

Part Number: CLA-TS0156-X3
Dimension Front-to-Back: 16 15/16”
Dimension Side-to-Side: 3 15/16”
Material: stainless steel
Weight: 2.1

$58.41

SET OF FOUR/4 PACK Stainless steel Heat Distribution Plates/Flame Tamers. Made in USA

.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.e.

Part Number: CLA-TS0156-X4
Dimension Front-to-Back: 16 15/16”
Dimension Side-to-Side: 3 15/16”
Material: stainless steel
Weight: 2.8

$74.84

Stainless steel Heat Distribution Plate/Flame Tamer. Made in USA

.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.e.

Part Number: CLA-TS0156
Dimension Front-to-Back: 16 15/16”
Dimension Side-to-Side: 3 15/16”
Material: stainless steel
Weight: 0.70

$21.09

Porcelain steel Heat Distribution Plate. Sold individually.

Replaces Brinkmann factory part# 600-2302-5

Part Number: 97311
Dimension Front-to-Back: 16 7/8”
Dimension Side-to-Side: 3 7/8”
Material: porcelain steel
Weight: 0.8

$26.76

$17.49

All Brinkmann Heat Distribution Plates

810-2310-1 (Pro Series 2310) Igniter Components

Push-button electronic igniter with four (4) spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: TS-IG4010
Weight: 0.2

$18.48

Battery powered push button igniter.

Has four (4) spade type male connectors.
Uses 1 AAA battery (not supplied)
Requires 3/4” or 13/16” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB4-B
Weight: 0.3

$34.08

Universal four-outlet battery powered push button ignitor.

1.5 volt
Has four (4) terminals (male spade connector)
Uses a single AA battery (not included)
03610 and 03620 wires are commonly used with this igniter (not included)
Requires 7/8” mounting hole
Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03340
Weight: 0.5

$31.50

Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

Wire has female spade connector on one end and square plastic connector on the other
Square plastice connector attaches to spark generator
Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 03610
Weight: 0.05

$9.07

14” ground wire with female spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03620
Weight: 0.1

$6.55

Collector box, ceramic electrode, insulating sleeve, and 14” wire with female space connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Brinkmann factory part# 600-7541-B

Part Number: 08300
Material: ceramic
Weight: 0.3

$14.61

All Brinkmann Igniter Components

810-2310-1 (Pro Series 2310) Heat indicators and Meat Thermometers

heat indicator for Brinkmann model 810-2310-1.

Replaces Brinkmann factory part# 072-2400-0

Part Number: 02351
Dimensions: 2 5/8” x 2 5/8”
Weight: 0.2

$14.85

All Brinkmann Heat indicators and Meat Thermometers

810-2310-1 (Pro Series 2310) Accessories

6 chrome plated 18” shish-ke-bab skewers

Part Number: 63371
Weight: 0.2

$14.27

Deluxe 17” stainless steel turner.

Soft comfort rubber grip
Stainless steel blade

Part Number: 43108
Material: stainless steel
Weight: 0.10

$9.48

economy basting brushes. Two brushes, 7.5” long.

Part Number: 43054
Weight: 0.1

$6.64

Upright porcelain steel roasting rack with grid topper.

Part Number: 40935
Weight: 2.9

$31.80

$21.99

Abrasive scrubbing brush. Ideal for cleaning porcelain grills.

Part Number: 71448
Weight: 0.2

$5.96

All Accessories

Copyright © 2004, 2008, 2020 clagrills.com All rights reserved
Build date: Thursday, September 5, 2024

All trademarks the property of their respective owners, and are not affiliated with CLA Grills & Service or it's products.