Barbeques Galore Y0662NG (Grand Turbo)

P1961B-R1-X6 Cast Iron Burners. SET OF SIX (6)

Fits the following Grand Turbo grill models:

• Y0662LP & Y0662NG 6-Burner models
• Y0663LP & Y0663NG 6-Burner models
• Y0665LP & Y0665NG 4-Burner models

This aftermarket part replaces original cast iron Turbo burner part P1961B.

Part Number: P1961B-R1-X6
Dimensions: 16 1/4” x 2 1/16”
Material: cast iron
Weight: 3.1

P1961B-R1 Cast Iron Burner.

Fits the following Grand Turbo grill models:

• Y0662LP & Y0662NG 6-Burner models
• Y0663LP & Y0663NG 6-Burner models
• Y0665LP & Y0665NG 4-Burner models

Also available in more economical 4 and 6 burner multi-packs.

This aftermarket part replaces original cast iron Turbo burner part P1961B.

Part Number: P1961B-R1
Dimensions: 16 1/4” x 2 1/16”
Material: cast iron
Weight: 3.1

Ceramic Flame Tamers for Grand Turbo grills. Measures 7 1/16” x 4 3/4”. Box of 4.

Note: This part is used in racks P1741A, and P1742A.

Fits models:

• Y0662LP/NG
• Y0663LP/NG
• Y0665LP/NG
• And others

Replaces Barbeques Galore factory part# P1751A

Part Number: P1751A-R
Dimension Front-to-Back: 7 1/16”
Dimension Side-to-Side: 4 3/4”
Material: ceramic
Weight: 4.0

Flame Tamer Rack for Grand Turbo. Heavy duty nickel plated 5/16” steel rod. Each rack holds twelve (12) P1751A-R ceramic flame tamers (sold separately).

NOTE: This is an aftermarket part made to replace original part number P1741A, which is no longer available.

Fits models:

• Y0662LP
• Y0662NG
• Y0663LP
• Y0663NG
• and others

Replaces Barbeques Galore factory part# P1741A

Part Number: P1741A-R
Dimension Front-to-Back: 17 1/4”
Dimension Side-to-Side: 33 7/16”
Material: nickel plated steel
Weight: 8.95

Battery powered push button igniter.

• Has four (4) spade type male connectors.
• Uses 1 AAA battery (not supplied)
• Requires 3/4” or 13/16” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Barbeques Galore factory part# P2503C

Part Number: IGEIB4-B
Weight: 0.3

Universal four-outlet battery powered push button ignitor.

• 1.5 volt
• Has four (4) terminals (male spade connector)
• Uses a single AA battery (not included)
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole
• Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Barbeques Galore factory part# P2503C

Part Number: 03340
Weight: 0.5

Push-button electronic igniter with four (4) spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: TS-IG4010
Weight: 0.2

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

• Wire has female spade connector on one end and square plastic connector on the other
• Square plastice connector attaches to spark generator
• Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 03610
Weight: 0.05

14” ground wire with female spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03620
Weight: 0.1

Genuine OEM control knob..

• Off position D-Value: 6 or 12 o'clock
• Knob diameter: 2 1/4”
• Socket diameter: 8mm
• Knob shaft: none (flat)

Part Number: 472-C565
Weight: 0.1

Universal 2 5/16” knob.

• Selectable D-Value
• Selectable socket diameter - 6mm or 8mm.
• Selectable shaft length - flush, 1/4”, or 1 5/8”. Shafts can also be trimmed to desired length.
• Includes 6 shaft inserts and set screw.
• Fits any grill with inside bezel diameter greater than 2 5/16” (the knob diameter).

Replaces Barbeques Galore factory part# P03411011L

Part Number: 02342
Dimensions: 2 5/16” x 2 5/16”
Material: plastic
Weight: 0.20

Straight thru L.P regulator with 28” hose. Adequate to 90,000 BTU.

Replaces Barbeques Galore factory part# P3632K

Part Number: HR-6B
Dimensions: 28
Weight: 1.50

24” LP hose and regulator with QCC-1 connection.

• For use on ”new style” QCC-1 tanks.
• Consists of hose part# 01000 and regulator part# 00920.
• Hose end with SAE 3/8” female flare fitting connects to grill.

Note: The grill must have a matching SAE 3/8” male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 3/8” fitting is much larger, approximately 5/8”. See our flare fitting description for information on measuring and sizes.

Replaces Barbeques Galore factory part# P3632K

Part Number: 80012
Dimensions: 23 1/2” x 0 1/2”
Weight: 0.80

10” Bamboo Skewers (100 pieces)

• Ideal for grilling meat and vegetables
• Soak skewers in water about 1/2 hour before using
• Use foods that require the same amount of cooking time. Meats can be pre-cooked. Marinated foods are recommended for added flavor.
• Great for chicken or beef, ham, lamb, or veal, salami, shrimp, or scallops, mushrooms, sliced peppers, omion, carrots, cherrytomatoes, pineapples, zuccini, and apples.

Part Number: 11060
Weight: 0.6

20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.

Part Number: 40269
Material: stainless steel
Weight: 0.14

Deluxe 13” basting mop with hardwood handle and cotton mop head.

Part Number: 42055
Dimensions: 13
Weight: 0.2

Stainless steel chicken roaster. Commonly called Beer Can roasters.

• The best way to roast poultry on the grill
• For use in barbecues and ovens
• Dishwasher safe
• Includes rack, rack support, and basting brush

Part Number: 41333
Material: stainless steel
Weight: 0.10

deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.

Part Number: 70255
Dimensions: 18 5/8” x 3 1/2”
Weight: 0.7